Author Topic: how much will the stock 1.9TD clutch take (Read 2486 times)

James8485 · « **on:** September 24, 2008, 08:07:38 pm »

fueling up, bigger turbo(K24) , bigger exhaust and 1.6TD boost pin should the stock clutch hold with these few advancments??

is ther an upgrade thats a direct replacment?

i think mine is slippin a bit and its only 1 1/2 old......

this possible>

jtanguay · « **Reply #1 on:** September 25, 2008, 04:55:41 am »

cable clutch? where does the clutch engage? AFAIK you can install a VR6 clutch upgrade... 1.9's should be able to hold quite a bit of power before letting go... what is your driving style like? the more you ride/play the clutch, the more it will wear...

MJF · « **Reply #2 on:** September 25, 2008, 05:28:31 am »

What car? You need 02A tranny for VR6 clutch.

1slowvw · « **Reply #3 on:** September 25, 2008, 09:57:46 am »

I run a AZZ in a mk2, boost, pin, fuel increase, 2.5 inch turbo back exhaust, FMIC, K-24, you know the usual haha, and i just put in another stock clutch, this one now has about 800km on it, and is slipping already, I will be going 6 puck soon. That being said i run an 020 small w/small spline, I belive a big spline set up, with the larger clutch surface would be able to take more punishment.
Also my driving style is um... spirited.

1SlowVW

jtanguay · « **Reply #4 on:** September 25, 2008, 12:01:28 pm »

Quote from: "1slowvw"

I run a AZZ in a mk2, boost, pin, fuel increase, 2.5 inch turbo back exhaust, FMIC, K-24, you know the usual haha, and i just put in another stock clutch, this one now has about 800km on it, and is slipping already, I will be going 6 puck soon. That being said i run an 020 small w/small spline, I belive a big spline set up, with the larger clutch surface would be able to take more punishment.
Also my driving style is um... spirited.

1SlowVW

hmmm :lol: is it in launches that you feel it slip, or is it when you really stomp on it and boost is going crazy?

i've driven a vw where the clutch would just break loose because of the power... very fun car to drive until that started to happen

Smokey Eddy · « **Reply #5 on:** September 25, 2008, 12:13:49 pm »

yeah mine isn't going to take what im building. =(
is a vr6 the only way to go?

subsonic · « **Reply #6 on:** September 25, 2008, 12:28:06 pm »

What are you using for a pressure plate?

the caveman · « **Reply #7 on:** September 25, 2008, 12:37:00 pm »

I had my 98 TDI jetta chipped and bigger nozzles and everytime i launched with anything more than 1/2 throttle you could smell the clutch cooking. My friend bought the car but without the nozzles and it's still the same clutch after a year. All to say -yes you need a VR6 clutch and pressure plate.