TDI intake + AAZ head - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• TDI intake + AAZ head by Smokey Eddy on 15 Sep, 2008 20:42
• Will a TDI intake fit with an AAZ head + garett t3 and 1.6TD exhaust manifold
  
  I know the TDI intake has to be ported to line up nicely but other than that will it fit alright with the turbo and exhaust manifold?
• #1 by jtanguay on 15 Sep, 2008 20:45
• i'm pretty sure the TDI intake is bolt on, as it has the same D shaped ports as the 1.9 IDI.  different story if you're using it on a 1.6 though.  not sure if it would accomodate the T3/K24 turbo though.
• #2 by Smokey Eddy on 15 Sep, 2008 21:34
• crap. I know it bolts on but im mostly concerned about a 1.6 exhaust mani being on there too and the T3 is a really big concern. I'm sure other people have done this though
  Please someone chime in!
• #3 by dillenger1 on 16 Sep, 2008 03:14
• I successfully used a alh intake with t3 manifold!there is some grinding of the support holes on the back(they stick out),but those arent needed anyway.this was on a 1.6 though.I dont know of differences in the casting of the head.
• #4 by Smokey Eddy on 18 Sep, 2008 21:33
• hopefully the same dillenger1!!!
  I ground those support things off about 2 years ago when i did my first hg