-
FS AAZ 1.9 td parts, engines, transmissions, etc
by
houseofdiesel
on 04 Sep, 2008 19:07
-
So I have come to realize there are too many parts kicking around...
B3/B4 Passat AAZ
-transmission $200 02A cable shift
-flywheel/clutch $50
-a/c compressor $25
-all brackets $10-100 each
-injection pump (DOES NOT have the aneroid boost enrichement, it is there but no way to hook up a line no fitting, all CDN Passats were like this) $150
-p/s pump $40
-injectors $60 set of four
-rebuilt cyl head 1.9 AAZ td (never installed) $500
-1.9 AAZ td block with crank, rods/pistons, intermediate shaft etc has new rings and rod bearings $400
-used AAZ 1.9 block with crank/rods/pistons/intermediate shaft $300
-manifolds with egr function
MK3 Golf and Jetta
-1.9 AAZ block with fixed crank gear (machinist good job) complete with crank/pistons etc $400
-1.9 AAZ crankshaft, polished, tdi crank gear fix $250
-all brackets, valve covers, timing belt covers upper/lower/inside/outside
-clutch and flywheels for 020 trans
-front crossmembers for rad
-subframes for engines
-steering racks, a.c. compressors, manifolds,
I have multiples of pretty much everything, I just cleaned out a friends garage of Vanagon parts need some more space. I will reply however I am busy each night after work putting up more shelves etc to keep it all inside.
Greg
-
#1
by
shortysclimbin
on 05 Sep, 2008 11:10
-
Greg how much for the front engine mount braket and bolts?
-
#2
by
houseofdiesel
on 05 Sep, 2008 19:14
-
Front engine mount bracket $10 with bolts.
Greg
-
#3
by
RabbitGTDguy
on 05 Sep, 2008 21:34
-
have the IP pump cable assembly for this car (pedal to pump). I'm in need for the b3 mTDI conversion. Thought I had one lined up but haven't heard in a while. Were there any special cruise considerations for the b3 AAZ passats related to the pump? switches, etc? I'd be interested in them as well as the brackets that hold them. If you'd part.
Joe
-
#4
by
tSoG-84bit
on 07 Sep, 2008 16:50
-
just curious, but how much for all engine parts and related accessories? no need for A2/3 parts that don't bolt in to A1, or powersteering.
I can pick up so no need for shipping quotes. thanks.
-
#5
by
commuter boy
on 07 Sep, 2008 21:46
-
B3 Passat air intake to turbo hose for a K14?
-
#6
by
houseofdiesel
on 08 Sep, 2008 16:09
-
I should have the air intake hose, it would really help if you could read the part number off yours though since mine are together on a shelf
I am not sure about the throttle cable from the B3, I think it went onto a conversion car already (gas to diesel). I have to double check what is still on one of the motors tonight
tSoG-84bit just list what you are looking for/need and I will quote you a price, I will try to get some pics up soon to give everyone an idea of how much I have accumulated...
Greg
-
#7
by
tSoG-84bit
on 08 Sep, 2008 22:23
-
I'm interested in blocks, heads and their internals; injection pumps, lines, and injectors; manifolds, turbos. as much as will fit in a pickup truck. Pictures, and a full list/price of what you have would be appreciated, thanks.
-
#8
by
abnkeis
on 09 Sep, 2008 11:50
-
You have PM
-
#9
by
Jet A
on 09 Sep, 2008 16:45
-
pm'ed on the head
-
#10
by
Chuck S
on 10 Sep, 2008 10:40
-
Still have 4 for $60? I'll take 'em.
-
#11
by
RabbitGTDguy
on 10 Sep, 2008 20:34
-
don't have a AAZ camshaft in good shape do you?
Joe
-
#12
by
Chuck S
on 10 Sep, 2008 21:11
-
Still have 4 for $60? I'll take 'em.
Arrg!!
I meant to write:
Do you still have 4 AAZ injectors for $60?
I'll take 'em if you do!
-
#13
by
bigblackcaddy
on 16 Sep, 2008 00:33
-
Is your inbox full? Trying to send you PMs but they're not going through.
-
#14
by
starrd
on 16 Sep, 2008 01:06
-
do you have these items from an AAZ engine?
If so, let me know how much
Thanks