Started my port and polish today!! lots of pics! - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• Started my port and polish today!! lots of pics! by 53 willys on 22 Aug, 2008 21:48
• So I started to P&P my 1.6td head today :twisted:
  I gasket matched the intake and exhaust and also the exhaust manifold.
  I bought a $15 package of 80grit and 120 grit tapered and straight sanding barrels from harbor freight man they worked really good!!!
  I know lots of guys say not to do the exhust but when I looked at the ports they are not very flow freindly at ALL...most the restriction is around the valve seat..I am half way done now..I planned to do a VERY light P&P but once I was in there I could not help but remove all the sharp edges and casting seams...I got some pics I will post in the morning.
• #1 by g-spec on 23 Aug, 2008 08:29
• I did the same thing to my 1.9AAZ head while I was rebuilding the head. I also matched the exhaust manifold to the gasket and the intake manifold.
• #2 by Smokey Eddy on 23 Aug, 2008 18:40
• wow get those pics up boys i want to see
• #3 by 53 willys on 23 Aug, 2008 19:32
• Quote from: "Smokey Eddy"

  wow get those pics up boys i want to see

  
  
  man I have took like 50 pics and only 10 are maybe worth posting...I am having a hard time getting them right.....I do have the pics..but I am at work and cant get access to my photobucket account anymore..so I will post them in the AM
• #4 by 53 willys on 24 Aug, 2008 00:05
• here they are...I did not remove the valve guides..I just could not see it making that much difference when the guide sticks so far out of the head casting...but you can see the ridge that is big and sharp on the valve side....I did not remove to much in the ports..mostly just cleaned and smoothed all the edges...this is pics with only half the work done..I wanted to try and get a before/side by side shot for reference.
  
  
  
  
  
  
  
  
  
  
  
• #5 by 53 willys on 24 Aug, 2008 00:12
• some more showing the seam...
  
  
  
  
  I like this pic you can see the ridge has been taken down and you can tell there is much more room....left intake port=stock....right intake port has been ported an polished.
  
  
  
  
  
  Harbor freight sanding barrels
  
  
  
  sorry for the blurry pics I tried many different shots..I'm no photographer!
  
  
  this is my shaving pile after doing half the head...lol
  
  
  it's easier to tell what and how much better the head is when you can run your finger across the smoothed ports vs stock..but like I said it was hard for me to capture that with the camera..
  it also hard to tell but everything was gasket matched too.
• #6 by Smokey Eddy on 24 Aug, 2008 01:24
• naw naww
  looks awesome man
  i wish i had a head worth doing that to
• #7 by dankcorey22 on 06 Dec, 2010 09:59
• Really looks good man! Im getting ready to do my head. did you do all of it with those barrels or did you polish it with something else?
• #8 by rallydiesel on 06 Dec, 2010 10:06
• Looks good!
• #9 by zukgod1 on 06 Dec, 2010 10:48
• Holy old thread Batman!!!!!!
  
  
  
  Last post was Aug of 2008
  
  
  
  
  
  
  
  
• #10 by 8v-of-fury on 06 Dec, 2010 12:41
• I did a 8 year thread bump on thevortex last week lol they responded too!! Lol
• #11 by Thezorn on 06 Dec, 2010 17:33
• Quote from: 8v-of-fury on 06 Dec, 2010 12:41

  I did a 8 year thread bump on thevortex last week lol they responded too!! Lol
  

  
  Haha just in time for me actually, probabley going to be doing this sometime this week.
• #12 by dankcorey22 on 06 Dec, 2010 18:21
• Quote from: Thezorn on 06 Dec, 2010 17:33

  Quote from: 8v-of-fury on 06 Dec, 2010 12:41

  I did a 8 year thread bump on thevortex last week lol they responded too!! Lol
  

  
  Haha just in time for me actually, probabley going to be doing this sometime this week.
  

  
  Me too! Ill probably post some pic.