-
Anyone selling a head gasket (2 notch) and 12mm stud set ?
by
arb
on 15 Aug, 2008 19:53
-
Anyone in SE Michigan with an extra head gasket (2 notch) and 12mm stud set for a 1.6L (1982.5) they want to sell me ? I don't see where Parts Place Inc carries the stud set...
-
#1
by
blkboostedtruck
on 15 Aug, 2008 20:39
-
set of 10bolts 12mm head bolt part#sn15551 parts place $28.95
2notch part#sn1186 parts place $28.95
that info from Blkboostedtruck priceless :wink:
Duane
-
#2
by
arb
on 15 Aug, 2008 20:48
-
Yeah, I see they sell the head bolts and gasket, I was looking for the Stud set - the Ford/ Cogsworth.... a little earier to assemble. I've never rebuilt with studs - always used the copper Permatex gasket spray to get the gasket to stay put while I set the head with normal bolts...
-
#3
by
blkboostedtruck
on 15 Aug, 2008 20:57
-
OH thats easy! grind heads off 2 old bolts and then grind a slot for a screwdriver use those to line up the head and hold gasket in place then just use a screwdriver to remove them and magnet after a couple new bolts have been put in after the head has been set on!
you understand what i mean? with that process?
Duane
-
#4
by
arb
on 15 Aug, 2008 21:01
-
Yep, I might end up doing it that way :-) I understood the studs to not stretch like the stock bolts so you can use them over and over...
-
#5
by
jimfoo
on 15 Aug, 2008 21:20
-
Get studs from Summit Racing.
-
#6
by
arb
on 15 Aug, 2008 21:35
-
I really need to be bolting this engine in my caravan sooner than that.... If I can't get studs locally in a few days, I'll use stock this time around.
Say Jimfoo, like watching your wheelin photos. Did you but a locker in your diff's yet ? I've got a first gen Rubicon and that magic button means I've never been recovered but I've recoved many...
-
#7
by
subsonic
on 15 Aug, 2008 22:02
-
Try headbolts.com
I have a new metal aaz 3 notch you could use if your setup is hydro.
-
#8
by
fatmobile
on 15 Aug, 2008 23:45
-
Yeah, headbolts.com,.. as long as you have the part number.
-
#9
by
arb
on 16 Aug, 2008 06:04
-
Does anyone have the part # for headbolts.com = the 12mm Stud set and 2 notch head gasket ?
-
#10
by
arb
on 16 Aug, 2008 13:30
-
-
#11
by
jimfoo
on 16 Aug, 2008 16:20
-
I really need to be bolting this engine in my caravan sooner than that.... If I can't get studs locally in a few days, I'll use stock this time around.
Say Jimfoo, like watching your wheelin photos. Did you but a locker in your diff's yet ? I've got a first gen Rubicon and that magic button means I've never been recovered but I've recoved many...
Locker in the rear.