Anyone selling a head gasket (2 notch) and 12mm stud set ?

[arb]

Anyone in SE Michigan with an extra  head gasket (2 notch) and 12mm stud set  for a 1.6L (1982.5) they want to sell me ? I don't see where Parts Place Inc carries the stud set...

[blkboostedtruck]

set of 10bolts 12mm head bolt part#sn15551 parts place $28.95
2notch part#sn1186 parts place $28.95

that info from Blkboostedtruck priceless :wink:
Duane

[arb]

Yeah, I see they sell the head bolts and gasket, I was looking for the Stud set - the Ford/ Cogsworth.... a little earier to assemble. I've never rebuilt with studs - always used the copper Permatex gasket spray to get the gasket to stay put while I set the head with normal bolts...

[blkboostedtruck]

OH thats easy! grind heads off 2 old bolts and then grind a slot for a screwdriver use those to line up the head and hold gasket in place then just use a screwdriver to remove them and magnet after a couple new bolts have been put in after the head has been set on!
you understand what i mean? with that process?
Duane

[arb]

Yep, I might end up doing it that way :-)  I understood the studs to not stretch like the stock bolts so you can use them over and over...

[jimfoo]

Get studs from Summit Racing.

[arb]

I really need to be bolting this engine in my caravan sooner than that.... If I can't get studs locally in a few days, I'll use stock this time around.

Say Jimfoo, like watching your wheelin photos. Did you but a locker in your diff's yet ? I've got a first gen Rubicon and that magic button means I've never been recovered but I've recoved many...

[subsonic]

Try headbolts.com

I have a new metal aaz 3 notch you could use if your setup is hydro.

[fatmobile]

Yeah, headbolts.com,.. as long as you have the part number.

[arb]

Does anyone have the part # for headbolts.com = the 12mm Stud set and 2 notch head gasket ?

[arb]

I forgot all about S & G in our area...  they had both. $63 out the door.

http://www.sgparts.com/

[jimfoo]

I really need to be bolting this engine in my caravan sooner than that.... If I can't get studs locally in a few days, I'll use stock this time around.

Say Jimfoo, like watching your wheelin photos. Did you but a locker in your diff's yet ? I've got a first gen Rubicon and that magic button means I've never been recovered but I've recoved many...

Locker in the rear.