Author Topic: WTB 1.6 Turbo Block Code MF (Read 6547 times)

Riverfurm · « **on:** August 11, 2008, 02:39:17 pm »

Looking for a block 1.6 turbo solid lifter (don't need head) block code MF.
Around Philadelphia Pa. Trenton NJ area (within 100 miles).

Wish full thinking?

:roll:

Thanks Furman

Got one coming from Bryn from Ok. Thanks for all your help

blkboostedtruck · « **Reply #1 on:** August 11, 2008, 02:55:38 pm »

are MF's all hydro's? all i seen are hydro's even the one's i have in the garage are hydro's!
Duane
http://www.thesamba.com/vw/classifieds/detail.php?id=632697

houseofdiesel · « **Reply #2 on:** August 11, 2008, 02:56:25 pm »

I had a solid lifter MF code 1985 Jetta turbo diesel, they do exist (or maybe that is existed...)
Greg

FWD.MOTION · « **Reply #3 on:** August 11, 2008, 03:00:52 pm »

did they have 11mm or 12mm heat bolts/studs?

blkboostedtruck · « **Reply #4 on:** August 11, 2008, 03:04:50 pm »

Quote from: "houseofdiesel"

I had a solid lifter MF code 1985 Jetta turbo diesel, they do exist (or maybe that is existed...)
Greg

yes now that i thought about it your right! i do remember and they may be hard to find because of such a short time being made from the factory!
Duane

FWD.MOTION · « **Reply #5 on:** August 11, 2008, 03:05:31 pm »

Quote from: "houseofdiesel"

I had a solid lifter MF code 1985 Jetta turbo diesel, they do exist (or maybe that is existed...)
Greg

blkboostedtruck · « **Reply #6 on:** August 11, 2008, 03:05:39 pm »

Quote from: "FWD.MOTION"

did they have 11mm or 12mm heat bolts/studs?

12mm as far as i know!
Duane

VW_Commuter · « **Reply #7 on:** August 11, 2008, 03:33:01 pm »

The motor in my '91 Jetta is an MF code solid lifter block. And, yes, they do have 12mm head bolts (or studs if you go that route).

Riverfurm · « **Reply #8 on:** August 11, 2008, 03:49:02 pm »

I see you guys don't live close to me and don't have a block for sale.

Thats what I'm looking for. Any help? Any leads?

myke_w · « **Reply #9 on:** August 11, 2008, 10:21:16 pm »

Quote from: "FWD.MOTION"

did they have 11mm or 12mm heat bolts/studs?

all td's were 12mm...

fatmobile · « **Reply #10 on:** August 12, 2008, 01:57:42 am »

I have one I'm trying to sell,... but am in Iowa.

Riverfurm · « **Reply #11 on:** August 12, 2008, 02:44:50 am »

Quote from: "fatmobile"

I have one I'm trying to sell,... but am in Iowa.

Thanks Fatmobile..... Shipping is a killer.

But if I can't find one I might need yours. How much are you asking?

Please don't hijack my post. I am looking for a block. If you don't have one don't leave a message on this post. PM each other if you what to talk about head bolt size or MF code engines.

Thanks.... I'm a little frustrated because the vendor (Parts Place)who said three weeks to put together a short block is going on six, and I need this car running.

myke_w · « **Reply #12 on:** August 12, 2008, 04:33:09 am »

Do you just need a block or do you need a shortblock?

blocks are light and cheap to ship through fedex ground.

Just letting you know.

myke_w · « **Reply #13 on:** August 12, 2008, 07:31:39 am »

FYI - fatmobile might part it out.

I'd possibly interested in the other stuff if you wanted to go in on it...

fatmobile · « **Reply #14 on:** August 13, 2008, 11:12:39 pm »

I have a block at the machinist getting ready to be bored for 1.7 pistons,... they told me it is cracked so it looks like I'll be needing this block.