Very good timing sets for sale!!! check it out! - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• Very good timing sets for sale!!! check it out! by jtanguay on 29 May, 2008 00:52
• http://cgi.ebay.at/ws/eBayISAPI.dll?ViewItem&itemcount=4&sspagename=MERC_VIC_RCRX_Pr4_PcY_BIN_IT&_trkparms=algo%3DCRX%26its%3DS%252BI%26itu%3DUCI%252BSI%26otn%3D4&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&viewitem=&refitem=140235876458&item=140235350179&refwidgettype=cross_promot_widget&_trksid=p284.m183
  
  I must say that this timing set is really good.  the cam locking plate fits in really snug, and won't allow the end to break when removing the cam sprocket bolt.
  
  There is also good preload on the dial indicator, and its METRIC  
  
  sweet deal just thought i'd share.
  
  oh and i snagged the one that was in english  :oops:   :lol:  
  
  http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=140235876458
• #1 by burn_your_money on 29 May, 2008 04:55
• Quote from: "jtanguay"

  the cam locking plate fits in really snug, and won't allow the end to break when removing the cam sprocket bolt.

  
  
  Of course not, how can you break the cam when the cam timing tool isn't even installed when you are removing the cam bolt?
  
  I have one of those kits, it certainly isn't the highest quality but it definitly is not crap. I'd never hesitate to use it if I couldn't find my other one
• #2 by clbanman on 29 May, 2008 09:24
• Burn, what is your preferred set, and how does it compare price-wise to this one?
• #3 by burn_your_money on 29 May, 2008 10:33
• I don't know. I got a used one. It comes in a padded case and everything. I'll try and get a name off of it.
• #4 by burn_your_money on 29 May, 2008 16:35
• The case says
  Central Tools Inc
  Cranston, RI
  USA
  
  Did some searching, It is tool # 6477 on this page
  http://www.centraltools.com/dials_engine.html
  
  Discontinued sadly
• #5 by clbanman on 31 May, 2008 04:55
• Found this while searching to try and find another supplier.  I know nothing of their quality and it's not the same part but:
  
  http://www.filterbuy.com/toolsite/schley.html
  
   At least they're willing to put a brand name on it.  Go down almost halfway to 83300.  There's lots of other VW tools as well.
  
  Also if you click on Home and then the page for Assenmacher tools, there are more VW specific tools.
  
  http://www.motorshack.com/acatalog/Diesel_Timing_Tools.html
  
  Dream set:
  
  http://www.lasertools.co.uk/item.aspx?cat=317&item=1432
• #6 by jtanguay on 31 May, 2008 08:55
• Quote from: "burn_your_money"

  Quote from: "jtanguay"

  the cam locking plate fits in really snug, and won't allow the end to break when removing the cam sprocket bolt.

  
  
  Of course not, how can you break the cam when the cam timing tool isn't even installed when you are removing the cam bolt?
  
  I have one of those kits, it certainly isn't the highest quality but it definitly is not crap. I'd never hesitate to use it if I couldn't find my other one

  
  
  i used the cam locking plate from that kit to remove my cam sprocket bolt... never had an issue yet!
  
  now put some loctite on that bolt and we might have an issue...