Author Topic: for those with diferent valve covers (Read 11017 times)

carrizog60 · « **on:** March 26, 2008, 01:02:48 am »

i have a gti 8v valve cover to install but as i was looking for a pic and size of the bolts to it i read that the timing belt cover wont fit...

is this true?what should i do to make it fit?

my car is a daily so i dint have the possibility to have it stopped to check for that as for the bolts size so any help on this two would be great :arrow:

thanks

Baselyne · « **Reply #1 on:** March 26, 2008, 01:16:44 pm »

I cant see how you'd fit a 3 sprocket cover onto the 4 sprocket diesel

You have a injection pump in the way....I could be wrong but I know mine doesnt fit!

that's just my personal experiences
Good luck

jimfoo · « **Reply #2 on:** March 26, 2008, 01:45:53 pm »

Valve cover, not timing belt cover.

Baselyne · « **Reply #3 on:** March 26, 2008, 01:47:25 pm »

Quote from: "carrizog60"

i have a gti 8v valve cover to install but as i was looking for a pic and size of the bolts to it i read that the timing belt cover wont fit...

is this true?
thanks

jimfoo · « **Reply #4 on:** March 26, 2008, 01:50:35 pm »

Guess I read it as GTI valve cover with Diesel timing cover. Guess we need some clarification.

Baselyne · « **Reply #5 on:** March 26, 2008, 02:24:32 pm »

yah I think it depends on how you read it, wheres the little comma ,?

english can be tricky with all out direct word meanings and slang.

carrizog60 · « **Reply #6 on:** March 26, 2008, 02:29:47 pm »

Quote from: "jimfoo"

Guess I read it as GTI valve cover with Diesel timing cover. Guess we need some clarification.

yes, i read that a gti valve cover wont go with the gtd timing belt cover.

Baselyne · « **Reply #7 on:** March 26, 2008, 02:32:16 pm »

carrizog60 · « **Reply #8 on:** March 27, 2008, 12:40:20 am »

so :idea:

carrizog60 · « **Reply #9 on:** April 09, 2008, 03:03:54 pm »

:arrow: :idea:

have the cover to fit but new some guidelines...

carrizog60 · « **Reply #10 on:** April 11, 2008, 02:44:36 pm »

no one? :roll:

zukgod1 · « **Reply #11 on:** April 11, 2008, 02:52:17 pm »

Try it, there's what 8 nuts holding it on?

Darth Garry · « **Reply #12 on:** April 11, 2008, 03:57:17 pm »

I have a 1.6, don't know if the bolt config is different. But, I put a G60 cover on and it fit with a little grinding to fit under the timing cover.

http://www.notinteresting.com/photoalbum/080403_Truckdoza/P1000994.JPG

Garry

Dirtrag2 · « **Reply #13 on:** April 11, 2008, 04:23:36 pm »

Woah Darth Garry, that looks great :lol: plus custon intake:?:

stewardc · « **Reply #14 on:** April 12, 2008, 07:57:27 am »

The G60 cover fit my 1.6 with no mods at all. I did get the rubber gasket and stud conversion off eBay. The new AAZ, has no available cover so I powdercoated that.

Author Topic: for those with diferent valve covers (Read 11017 times)

Baselyne

Baselyne

Baselyne

Baselyne

stewardc