Author Topic: wtb: 1.6 td hydro block (Read 5592 times)

RabbitJockey · « **on:** August 29, 2007, 06:09:45 pm »

so i need the short block, including the internals, but i don't need an oil pan.

quietmission · « **Reply #1 on:** August 29, 2007, 08:54:01 pm »

I second that. I bought a complete hydraulic head from Tyler before that i am going to get worked on. Now, i would like to purchase a good 1.6td short block but unfortunately they are rare in boston.
Tyler--if you can get good quotes to Boston, then i am still interested in buying a short block from you if available.

burn_your_money · « **Reply #2 on:** August 29, 2007, 09:57:43 pm »

The reason he is asking is because the best quote I could find to PA was $330 just for shipping.

fatmobile · « **Reply #3 on:** August 29, 2007, 11:35:20 pm »

http://www.vwdieselparts.com/forum/viewtopic.php?t=6961
Close enough?

quietmission · « **Reply #4 on:** August 30, 2007, 08:20:52 am »

Hey Tyler,

For $330 only shipping, i would rather buy that 1.9td engine from you as we spoke before. The only bad thing is that i might not be able to fit all at once in my budget. Contact me and we can make arrangements.
The sad thing is that i just came from Canada two weeks ago but i was in Montreal though.

burn_your_money · « **Reply #5 on:** August 30, 2007, 02:17:28 pm »

The 1.9 is gone, sorry.

PM sent Travis

MOttS · « **Reply #6 on:** August 31, 2007, 02:50:02 pm »

I have right what you are looking for. My 1.6 TD motor head just blew up and I got a complet motor as a replacement. I just sold the oil pan and the turbo + exhaust manifold + oil line to someone with a 2.0 8V wanting to go turbo. So the block is for ya

. How much are you willing to pay? Lemme know by pm. I think burn_your_money is from Ontario so shipping from Quebec is about the same...

MOttS

RabbitJockey · « **Reply #7 on:** August 31, 2007, 03:05:20 pm »

haha if shipping is about the same then i'm not interested....

burn_your_money · « **Reply #8 on:** August 31, 2007, 05:59:28 pm »

Quote from: "Trev0rbr"

haha if shipping is about the same then i'm not interested....

stupid border *shakes fist*

Ziptar · « **Reply #9 on:** September 02, 2007, 05:16:33 am »

There are a couple complete cores on ebay in California.

http://tinyurl.com/3bkehd $250
http://tinyurl.com/3b5s2t $400 (claims to be a "High Output Core", GTD??)

RabbitJockey · « **Reply #10 on:** September 02, 2007, 06:30:44 am »

till i get through shippig a 250 or 400 dollar block it will be even more expensive

ilikevwdiesel · « **Reply #11 on:** September 02, 2007, 05:06:03 pm »

Quote from: "Trev0rbr"

so i need the short block, including the internals, but i don't need an oil pan.

I have a hyd. MF block, call me if you're interested 207 897 4402

Scott

sethyboy85 · « **Reply #12 on:** September 03, 2007, 05:33:02 pm »

I might have one...
and I can meet you in Hburg or down in york it's not that much further for me..