-
#15
by
935racer
on 20 Sep, 2006 17:51
-
Anymore interest in adjustable sprockets? I have the means to make the custom hubs to mate these to our IDI pumps.
-
#16
by
Kudagra
on 20 Sep, 2006 21:34
-
Yes Id like a adjustable IP pully and a lightened flywheel.
I can ship that flywheel anytime.
I was going to send it with the injectors...but I think the injectors might not make the trip being jostled around with a stock 200mm flywheel.
-
#17
by
935racer
on 20 Sep, 2006 21:37
-
Ok I am back at the machine shop on monday so I will see what I can work out for the flywheels.
Tomorrow I'll get together with easy e and see what we can come up with the adjustable sprockets and hubs.
-
#18
by
Kudagra
on 20 Sep, 2006 21:59
-
Im going to have to take a road trip one of these days.
-
#19
by
935racer
on 20 Sep, 2006 22:37
-
Do it
-
#20
by
zagarus
on 21 Sep, 2006 00:14
-
i;ve been meaning to all summer, but alas, money disappears faster then you think.
-
#21
by
2mn2
on 21 Sep, 2006 08:15
-
I am interested in an adjustable pump pulley.
-
#22
by
935racer
on 21 Sep, 2006 10:05
-
Ok seems there is some interest, I'll post up late tonight what I can do about custom hubs.
-
#23
by
Justin
on 21 Sep, 2006 17:01
-
I am interested in the adjustable pulley idea for my TDI with the 17mm pump shaft as well as the 6lb flywheel/performance clutch idea.
Any idea on pricing for these for a ball park? dont worry I wont hold you to it.
later
Justin
-
#24
by
935racer
on 21 Sep, 2006 19:55
-
Custom hubs will be in the 50-80 ballpark, still need to find a good source for the sprockets, Should be able to find a sprocket solution next week. 6lb flywheels will likely be in the $100-120 zone. I will definately post up final prices when I can get more things nailed down.
-
#25
by
Justin
on 21 Sep, 2006 22:10
-
one more suggestion would be to place a locator hole in the pulley for the IDI guys and their timing hole
Later
Justin
-
#26
by
935racer
on 21 Sep, 2006 22:25
-
Yeah thats already part of the plan, the only tricky thing is gonna be getting the keyway made in the hub. I think I am gonna have to use this cutter called a broach, I used one years ago, I'll see what I can come up with.