My 80 rabbit runs perfect if I pop start it. It will not however, start using the key. You can crank it forever, and it acts like a diesel getting no fuel (yes it's getting fuel). By that I mean, no combustion, rumbling, smoke, etc. just cranks.
Wtf m8?
Thanks
Low compression, methinks. Got blowby when running?
power at shutoff solenoid while cranking?
Low compression, methinks. Got blowby when running?
Blow by not so much. She rips for a 1.5 also - Burt dyno analysis.
power at shutoff solenoid while cranking?
Interesting. Could I test this by simply unplugging the shutoff solenoid?
No, you need a volt meter or test light.
No, you need a volt meter or test light.
^^ and someone to turn the key while you look for 12 volts to the solenoid (
while it cranks).
I just set the meter against the raised up hood and run the leads out to the points of contact and clip them where they need to be. But I do have a good selection of jumpers with alligator clips on them.