-
#30
by
8v-of-fury
on 10 Aug, 2012 12:50
-
Easy Peasy lemon squeezy.
Rockauto.com
1991 Volkswagen Golf 1.6 N/A diesel
$19.23
-
#31
by
CRSMP5
on 10 Aug, 2012 13:03
-
passat tie rods longer then mk2.
-
#32
by
8v-of-fury
on 10 Aug, 2012 13:19
-
woops. Missed the b3 part. MY BAD! lol
-
#33
by
bbob203
on 11 Aug, 2012 03:00
-
I just hate p/s makes you lazy
-
#34
by
bbob203
on 12 Aug, 2012 03:26
-
crs, if you've got a tig could just chop the tie rod in the middle and weld in and extension sleeve. I doubt it would be more than inch needed to make it work.
-
#35
by
CRSMP5
on 12 Aug, 2012 06:37
-
any thing can be done... but there are certain things that.. well id worry about longetivity/saftey..
-
#36
by
bbob203
on 12 Aug, 2012 06:43
-
-
#37
by
TylerDurden
on 12 Aug, 2012 06:44
-
I'm still fuzzy on a couple of things:
Drive axles on the 02a ( I got some conflicting info)... which should I order?
Also wondering about radiator hoses... is something custom req'd?
-
#38
by
CRSMP5
on 12 Aug, 2012 07:04
-
100mm joints... so 100mm flanges on tranny is all you need... gotta use the passat axles.. vr6/16v different lengths... so depending on suspention used = axle used.. but just stock passat units..
upper hose needs made up... no nipple on rad for coolent bottle.. so splice 16v upper hose w diesel upper hose... rest same...
-
#39
by
TylerDurden
on 12 Aug, 2012 07:18
-
100mm joints... so 100mm flanges on tranny is all you need... gotta use the passat axles.. vr6/16v different lengths... so depending on suspention used = axle used.. but just stock passat units..
upper hose needs made up... no nipple on rad for coolent bottle.. so splice 16v upper hose w diesel upper hose... rest same...
10-4, Thanks for the reply.
I'm sure there will be more questions about dash cluster hookups and other bits & bobs, but I'm ok with adding aftermarket guages... Heck, I drive these mk1 and mk2 rigs without any dash at all sometimes. (Just switches and dangling wires, lol.)
-
#40
by
CRSMP5
on 12 Aug, 2012 08:27
-
i built my own cluster... sadly the fuel gauge is backwards.. aka f is empty.. and e is full... also it f when 1/4 tank.. resistance all wrong for stock sender to vdo aftermarket gauge..
why wagon on wrong coast??? front bumper toast... those wheels real soft and heavy... you will want light as possible.. and strong so they no bend on the east coast crappy potholes...
-
#41
by
bbob203
on 12 Aug, 2012 10:09
-
I got free flight benefits thru job I buy cars far away in good shape and drive em home. I'm over the red one no abs for me.
-
#42
by
bbob203
on 13 Aug, 2012 14:13
-
Tyler have you looked at 02a clutch cable conversions?
-
#43
by
TylerDurden
on 13 Aug, 2012 14:16
-
Hi Bob,
Not as yet... I got a hydraulic setup in the parts bin, but I don't know if it's in good order.
I'd be interested to know more about the cable setup - I like simple.
-
#44
by
bbob203
on 18 Aug, 2012 16:10
-