Source for parts great quality - page 2 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #15 by dankcorey22 on 20 Jan, 2011 13:59
• I got 1mm over pistons. its 77.488
  
  I think 1mm over = .040 over so i need .040 over piston rings
• #16 by rallydiesel on 20 Jan, 2011 14:01
• Quote from: R.O.R-2.0 on 20 Jan, 2011 13:10

  Quote from: rallydiesel on 20 Jan, 2011 13:07

  FYI, .02" and .04" are 0.5mm and 1mm respectively.
  

  
  crap, i couldnt remember if it was .020 or .030..
  
  i stand corrected!
  

  
  No problemo, I do it all the time.
• #17 by dankcorey22 on 20 Jan, 2011 15:24
• Quote from: rallydiesel on 20 Jan, 2011 14:01

  Quote from: R.O.R-2.0 on 20 Jan, 2011 13:10

  Quote from: rallydiesel on 20 Jan, 2011 13:07

  FYI, .02" and .04" are 0.5mm and 1mm respectively.
  

  
  crap, i couldnt remember if it was .020 or .030..
  
  i stand corrected!
  

  
  No problemo, I do it all the time.
  
  Am i right i want to make sure? 1mm = .040
  
• #18 by BigVWman on 20 Jan, 2011 16:34
• I usually use a place called fap99freeship dot com. He is in MI and used to work for parts place. he knows his stuff and usually sells name brand parts at great prices if he has what you need. Only time i stray is if i need a dealer part then i use 1st vw parts.com they beat world impex most of the time.
• #19 by RabbitJockey on 20 Jan, 2011 18:01
• my 1.6td is .020 over
• #20 by dankcorey22 on 22 Jan, 2011 20:40
• i just purchased all my bearings from partsplaceinc.com all i gotta do now is call total seal for my .040 over rings, wonder how much they will be?
• #21 by RabbitJockey on 23 Jan, 2011 07:02
• let me know how you make out, i'm thinking of putting total seal top rings in my .020 over td
• #22 by dankcorey22 on 23 Jan, 2011 19:40
• What about the oil ring?