pics of fmic install on mk1 rabbit? anyone? - page 3 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #30 by Powered by Spearco on 24 Aug, 2010 21:30
• Yes it will. Only with the right ex. manifold.
  
  I'm using a T3 turbo from a Merc. 300TD bolted to an ebay ex. manifold all mounted in a VW truck.
  The underside of the gasser intake, depending if its a MK1 or MK2, needs to be clearanced.
• #31 by erice1984 on 24 Aug, 2010 21:33
• was looking at a digi from a 91 fox.
  
  the factory exhaust "log" manifold wont work?
  
  Something like this:
  http://cgi.ebay.com/ebaymotors/VW-8V-CAST-IRON-TURBO-EXHAUST-MANIFOLD-GOLF-JETTA-T3-/280552131590?pt=Motors_Car_Truck_Parts_Accessories
• #32 by Powered by Spearco on 24 Aug, 2010 21:53
• As fas as the factory log manifold. Which one.
  
  Yep, thats the same one I'm running, but coated inside and out.
• #33 by erice1984 on 24 Aug, 2010 22:00
• awesome..  digi gasser intake and ebay ex manifold..
  
  just got to find t3 with correct square flange.
  
  like this manifold
  
  
• #34 by Powered by Spearco on 24 Aug, 2010 22:11
• That manifold is from a AHU TDI. It uses a GT15 turbo. Of corse you could make an adapter, but if your going that far, may as well build a custom one for what you want, where you want.
• #35 by erice1984 on 24 Aug, 2010 22:14
• What did you do for waste gate?  Use internal or external?
• #36 by Powered by Spearco on 24 Aug, 2010 22:27
• The turbo has an internal wastegate. Opens at 11.5 psi.
• #37 by honda_is_the_best on 25 Aug, 2010 08:25
• Quote from: erice1984 on 24 Aug, 2010 21:15

  will a gasser intake manifold fit with a T3 turbo?
  

  
  only with a VNT manifold. and that happens to be the intake im running, they rock for stock VW manifolds.