AAZ turbo oil feed line replacement - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• AAZ turbo oil feed line replacement by haybayian on 11 Apr, 2010 12:44
• Hello IDI TDI friends,
  When I put back together my rebuilt 1993  1.9 turbo VW  the local dealer sold me a solid oil line  to feed the turbo. It has a banjo fitting at the lower end and something like M12 fitting at the turbo end.  Because of various mods I have introduced in this project the VW rigid oil line does not fit and I would like to replace it with a  longer braided flexible line. My question to you is: is there any downside in doing this. My second question is where do you suggest I call to acquire such a flexible line (I live in Ontario).
  
  Thanks
  
  Haybayian
• #1 by burn_your_money on 11 Apr, 2010 12:55
• You could call me. I have one. It's for a mk2 though so you would need an adapter at the oil filter flange
• #2 by haybayian on 11 Apr, 2010 19:07
• Quote from: burn_your_money on 11 Apr, 2010 12:55

  You could call me. I have one. It's for a mk2 though so you would need an adapter at the oil filter flange
  

  
  Thanks for the reply, I am not familiar with the mk2. Could you post a picture of the oil filter flange  or describe the adapter you are refering to.
  
  Haybayian
• #3 by 4wheeler on 11 Apr, 2010 19:33
• Which turbo do you have ?
  K03 or K14??
  
  I have an oil line for the K03 for ya
• #4 by burn_your_money on 11 Apr, 2010 19:34
• The thread pitch and diameter are different. The mk3 is the same as a wheel lug and the mk2 one is m12x1.5