Borg Warner BV50 Turbo Specs?? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• Borg Warner BV50 Turbo Specs?? by barrygti on 07 Apr, 2009 23:41
• Does anyone have a cpmpressor map for BV50 VNT turbos?
  
  I have 2 of them from Land Rover TDV6 engines, they run around 190bhp and 340lb/ft on the 2.7 V6 diesel. Believe it is also called a K04BV???
  
  What do we think on a 1.6 bottom end/1.9 head engine?
• #1 by subsonic on 08 Apr, 2009 05:39
• Not sure if this will help.  It has some more info that migt help you find the map:
  
  http://www.arturbo.co.uk/catalogue_turbos.asp?Make=18
• #2 by barrygti on 09 Apr, 2009 20:03
• Thanks, I have tried EVERYWHERE and can't find any info, so f*ck it I will just use it and hope it runs ok on a little 1.6 engine with my ported 1.9 head..
  
  If not I will revert to the standard 1.6 turbo.
• #3 by subsonic on 09 Apr, 2009 20:06
• What are the numbers off the ID tag?
• #4 by barrygti on 09 Apr, 2009 20:17
• Ok here goes:
  I.D. Tag
  Groess - 4H20 6K682 CG
  Lader - 1A 50091159 00036
  Ausf - 53049700065
  
  On inlet housing
  53041015196
  
  on Exhaust housing
  53041013569
  B 4.5 - 0.6
  KPE15K11
• #5 by barrygti on 09 Apr, 2009 20:23
• Only this one shows up anything and just tells me what I already know, it's from a Land Rover TDV6
  
  53049700065
• #6 by subsonic on 11 Apr, 2009 08:35
• Check out this link.  There is a guy who is running the same turbo.  Perhaps you can get in touch with him.  Good luck.  Jim
  
  http://forums.tdiclub.com/showthread.php?t=201181
• #7 by barrygti on 11 Apr, 2009 12:53
• Thanks, I will join up and get in touch with him!!