replacing clutch on 94 golf aaz whats a good clutch to use?? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• replacing clutch on 94 golf aaz whats a good clutch to use?? by Clintwalker85 on 03 Feb, 2009 22:32
• whats a good clutch to go with?  i want somthing better then stock but with an affordable price.. what are my options??
• #1 by dillenger1 on 04 Feb, 2009 03:10
• sach's
• #2 by Clintwalker85 on 04 Feb, 2009 08:56
• wheres a cheap place to get them?
• #3 by jtanguay on 04 Feb, 2009 11:13
• if you can use the 228mm (28 spline) clutch i'd go with a VR6 kit.
  
  http://www.boraparts.com/catalog/product_info.php?products_id=78
  
  seems according to that site that it will work.
• #4 by MJF on 04 Feb, 2009 11:25
• Quote from: "jtanguay"

  
  seems according to that site that it will work.

  
  
  Only with 02A. Not with 020 used in AAZ-Golfs.
• #5 by jtanguay on 04 Feb, 2009 11:26
• Quote from: "MJF"

  Quote from: "jtanguay"

  
  seems according to that site that it will work.

  
  
  Only with 02A. Not with 020 used in AAZ-Golfs.

  
  
  

  Quote

  As long as you have a single mass flywheel this can be made to work with any 4-cylinder VW from 1993 to the present (except 1998+ Passat).

  
  
  so he is mistaken then? or maybe he didn't mention that it will not work with an 020 box?
  
  i've also heard that it may be possible to change the center piece to accept different splines
• #6 by MJF on 04 Feb, 2009 12:03
• Quote from: "jtanguay"

  so he is mistaken then? or maybe he didn't mention that it will not work with an 020 box?

  
  
  Yep.
• #7 by Clintwalker85 on 04 Feb, 2009 20:13
• i'm looking at a rhino pak clutch kit..its soposto have 30% more pressure then stock kits...anyone use them?
• #8 by 1slowvw on 05 Feb, 2009 06:56
• www.autopartsway.ca is great if you are in Canada. They have both stock and aftermarket (I just got my 6 puck from them) there prices are great and you don't have to deal with duties.
  
  1SlowVW
  
  PS: I know that sounds like a shameless plug, I was just very satisfied with my experience with them. I don't work for them or anything like that.
• #9 by stewardc on 05 Feb, 2009 14:32
• I used an ACT setup. Couldn't be happier.