-
IP too far advanced timing symptoms by zozie on 20 Oct, 2008 05:02
-
Can someone tell me what the symptoms are of the IP being times too advanced?
thanx -
#1 by zukgod1 on 20 Oct, 2008 08:20
-
Sounds like someone threw a hand full of marbles in there when it's running.
Nasty pinging.. -
#2 by zozie on 20 Oct, 2008 08:51
-
That's exactly what I wanted to hear thanx
-
#3 by carrizog60 on 20 Oct, 2008 12:25
-
although mine showed 1.05mm at the dial i think i am too advance too.
diesel smell and smoke at start up and whitish/black under load(black is normal,i have the pump maxed out)
i think that these are also symptoms correct? -
#4 by zukgod1 on 20 Oct, 2008 13:03
-
Quote from: "carrizog60"
although mine showed 1.05mm at the dial i think i am too advance too.
diesel smell and smoke at start up and whitish/black under load(black is normal,i have the pump maxed out)
i think that these are also symptoms correct?
Yes. -
#5 by zozie on 20 Oct, 2008 15:21
-
Well mine pulls as good with the Giles pump as a 1.6D can, I onlt puff black smoke at low rpm under load but it is noisy.