Mercedes Nozzles - page 2 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #15 by zukgod1 on 09 Jul, 2008 11:22
• Quote from: "VW_Commuter"

  Zuk, do you have the part/stock number for those nozzles for the CASE backhoe?

  
  
  Yes I do, at home.
  I think i even have the flow rates.
  
  I'll post them up tonight. You may have to drop me a PM to remind me though. Once I get home I shut down all brain activity..
• #16 by Vincent Waldon on 09 Jul, 2008 12:11
• Quote from: "zukgod1"

  
  I think i even have the flow rates.
  
  

  
  
  OMG OMG OMG... flow rates !!  ;-)
  
  I'd kill to see some flow rates !!
• #17 by zukgod1 on 09 Jul, 2008 12:50
• Quote from: "libbybapa"

  X2 part number and flow rates needed.   :wink:
  
  Andrew

  
  
  I have both the part #'s and flow rates for the CASE tips and Chev 6.5 tips.
• #18 by dillenger1 on 09 Jul, 2008 14:05
• .........aaaaaaaaand...?
• #19 by zukgod1 on 09 Jul, 2008 14:12
• Patience grasshoppa. I'm not home and that's where the info is located.
  
  I'm still @ work for a few hrs
• #20 by zukgod1 on 10 Jul, 2008 06:17
• Here's what I have guys.
  
  mm/1000st        Application       Part#
  
  76  Yellow dot= 6.2L Nozzel     DNSO SD 248
  
  76  White dot=    VW              DNSO SD 293
  
  80  Red dot=       CASE          DN4S D42
  
  
  The first # is the flow rate it has a mm/3, 1000st (I have no idea what that means)
  So for what it worth hope it helps.
• #21 by gigaz2 on 10 Jul, 2008 06:21
• cubic millimeters for 1000 strokes? makes sense to me
• #22 by zukgod1 on 10 Jul, 2008 06:28
• As long as someone knows what it means