11 mm plunger in a 1.6TD - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• 11 mm plunger in a 1.6TD by la_poire on 07 Mar, 2008 21:15
• can i put a 11 mm plunger in my 1.6 td with AAZ dual stages injectors , gtd nozzles, and peugeot camplate? with a 20 mm axles (peugeot)? it is not too big? with 20 psi boost, AAZ head, fmic thanks
• #1 by Benjamin on 10 Mar, 2008 09:10
• any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question
  
  Greetz, Benjamin
• #2 by la_poire on 11 Mar, 2008 03:03
• Quote from: "Benjamin"

  any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question
  
  Greetz, Benjamin

  
  
  i can use fiat camplate in a IDI? if i can it's great, i fit the pump without modification  
• #3 by la_poire on 11 Mar, 2008 03:54
• Quote from: "Benjamin"

  any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question
  
  Greetz, Benjamin

  
  
  my 11 mm plunger came from tdi 2l fiat, fiat tdi camplate is ok for idi application?
• #4 by la_poire on 15 Mar, 2008 02:11
• Quote from: "libbybapa"

  You don't want to use a TDI camplate on an IDI engine.
  
  Andrew

  
  
  it's the reason, i want to use peugeot camplate
• #5 by DA-BRT on 21 Apr, 2008 06:26
• I think you're talking about a Fiat Croma TDID pump. Yes it can be fit at our IDI's. The camplate is somewhere between our IDI and DI. Defenitely not suitable for our IDI's (replace with electronic DI camplate)
• #6 by mdonau on 21 Apr, 2008 14:43
• i am running a xud12 (2,1L TD) pump with 10mm plunger..
  my 11mm wont fit to the camplate... pump works great on my AAZ with 1Z timingbelt-wheel!
• #7 by dillenger1 on 21 Apr, 2008 14:55
• I used a LDA and 10mm plunger from a peugoet 505 td.While dissassembling the pump i measured some things and the camplate was the same as the one for the 1.6na