-
Valves, oil pump, ARP studs?!
by
Torchd
on 26 Feb, 2008 07:14
-
Hey guys!!
Im new to this foum... i just needed sum info on a few things!
will 1.6NA(ME) and 1.6TD (MF) have the same engine valves and oil pump if both the engines have hytraulic lifters??
and which ARP head studs will fit my 1.6TD... can sum1 give me the part number and an address in uk and canada??
Thanks!!
-
#1
by
jimfoo
on 26 Feb, 2008 07:18
-
ARP part #s
Head Studs..........................251-4701
Main Studs...........................204-5402
Con Rod bolts 1.6 and 1.7......104-6002
Trans ring gear bolt kit 020 ...204-3001
Oil pump bolts.......................661-1014
I assume the head stud # is the 12mm stud. Some 1.6's had 11mm I guess.
-
#2
by
fastvicar
on 27 Feb, 2008 11:31
-
Correct, early '81 1.6L had 11mm Allen-head bolts. Supposedly the gassers' ARP kit will work with them. I'll find out in a few days.
-
#3
by
Torchd
on 03 Mar, 2008 23:32
-
Thanx guys!!
SO how do i find out which head bolts do i have in my car... 11mm or 12 mm???
Its 1.6 TD (MF engine code) 1988 year....
and which is the best place to get the ARP studs if im in Brimingham UK??
-
#4
by
AdAm84
on 04 Mar, 2008 08:42
-
When did they change to 12mm. I have an '84 1.6n/a. So which would it be?
-
#5
by
MJF
on 04 Mar, 2008 11:35
-
Correct, early '81 1.6L had 11mm Allen-head bolts. Supposedly the gassers' ARP kit will work with them. I'll find out in a few days.
-
#6
by
Baselyne
on 05 Mar, 2008 09:49
-
I was told 1.5's had 11mm and any 1.6's went with 12mm
we need to clear this kinda thing up before someone get burned on shipping and re-stocking fees
-
#7
by
Torchd
on 08 Mar, 2008 00:31
-
ARP part #s
Head Studs..........................251-4701
Main Studs...........................204-5402
Con Rod bolts 1.6 and 1.7......104-6002
Trans ring gear bolt kit 020 ...204-3001
Oil pump bolts.......................661-1014
I assume the head stud # is the 12mm stud. Some 1.6's had 11mm I guess.
The partnumber for the head studs u provided doesnt exist..... what i can find is 204-4701.. and they are for 1.8L-2.0L 8V jetta... are those the ones?? maybe u got a typo there... leme knw!
http://www.alamomotorsports.com/arp/hsvolkswagen.htmlhttp://arp-fasteners.com/Catalog/Catalog.html ( will have to download the catalogue)
-
#8
by
jimfoo
on 08 Mar, 2008 05:44
-
Maybe you aren't looking hard enough. I get plenty of hits for 251-4701 using google, even from ARP's own web site. It's even listed in your link above, well the second link at least. I'll give you a hint, you aren't looking for them under VW.
-
#9
by
Torchd
on 10 Mar, 2008 03:44
-
If u RECHECK in the ARP catalog..... the part number says 204 in the catalog ... NOT 251..(4701) remaining the same...
and i just did a google search for 251-4701.... and only MJM autohaus says they are for vw 1.6 diesel...all the other results say they are for some ford cosworth...
and i did a 204-4701 google search and it says.. this part number is for arp studs for 1.8L 2.0L 8V golfII...
so whci ones am i suppose to go forrr??
-
#10
by
jimfoo
on 10 Mar, 2008 07:14
-
Ford Cosworth. 251-4701 If you are worried, that's what I have installed in my engine. The cheapest place when I got mine was Summit Racing.
-
#11
by
Torchd
on 10 Mar, 2008 23:19
-
Hmm thanks..
so if i order the 251-4701.... i will get it as a kit rite?? like i will not need anything else to install them??
and will i be able to use them in a 1.9TD (aaz)?? i heard they are the same 12mm in the 1.6 and the 1.9?
-
#12
by
jimfoo
on 11 Mar, 2008 06:57
-
You get the studs, the washers, and nuts, and even some of their lube. The only thing you need is an allen wrench to put them in the head. Good in 12 mm 1.6 and AAZ blocks.
-
#13
by
Torchd
on 12 Mar, 2008 08:18
-
hmm.... thanx loadzzz man!!
one of my friends is gettin em tomorrow!!
-
#14
by
Mechanic
on 24 May, 2008 02:05
-
I need to find main bearing studs wich would go with main bearing girdle..