-
1.6 BOV Plug ???
by
stewardc
on 26 Jan, 2008 04:50
-
I bought one of these machined aluminum BOV plugs for my 1.6 and forgot where I got it. Does anyone know of a supplier?
-
#1
by
Baselyne
on 26 Jan, 2008 05:56
-
could you post a picture of this Block off plate? Im in the market for one next few weeks and It would be nice to know where to get them since that vendor is gone now....
-
#2
by
stewardc
on 26 Jan, 2008 06:08
-
It's from TDTuning.com....I found it. Here's the pic.
-
#3
by
Vincent Waldon
on 26 Jan, 2008 09:08
-
-
#4
by
stewardc
on 26 Jan, 2008 09:11
-
That's the one. I think he's not selling them any more. :cry:
-
#5
by
Baselyne
on 26 Jan, 2008 15:39
-
If he's not selling them then who is, Cant we all just make our own out of alum stock.... maybe some flat plate or do they come with a pressurised hole kinda>?
-
#6
by
stewardc
on 26 Jan, 2008 16:04
-
-
#7
by
jackbombay
on 26 Jan, 2008 17:51
-
Make your own out of 1/8" steel seal it with sillycone and use the stock clamp on it as well.
-
#8
by
jtanguay
on 27 Jan, 2008 04:20
-
guys... screw the BOV blocker. its only good if you want to go above 20 psi (which is only for the hardcores out there :lol:)
just screw that screw in and you'll be hard pressed to open the BOV. i pegged 20 psi and even more without my BOV opening :wink:
-
#9
by
Vincent Waldon
on 27 Jan, 2008 10:52
-
Ah, but methinks Mr. Stewart is wanting to pimp his engine
:wink:
-
#10
by
935racer
on 27 Jan, 2008 11:00
-
If Mike doesn't want to make anymore I can, easy project for the cnc lathe to take care of
But shoot him a pm and see if he has anymore or intentions of making more.
-
#11
by
gilligan5000
on 28 Jan, 2008 18:37
-
My pickle jar lid works pretty well
-
#12
by
vwmike
on 28 Jan, 2008 23:29
-
It's really kind of strange.....I've had only a few people interested since I ran out but all of a sudden a bunch of people want them. I'm going to check into having more of them made. The machinist that originally made these is no longer machining stuff
-
#13
by
vwmike
on 29 Jan, 2008 02:08
-
Ok, I think I can have more of them made. How about a roll call. How many are in?
-
#14
by
foxracer1
on 29 Jan, 2008 04:34
-
I'd be interested in a couple. How much $?
