-
alt. pulley by BEEJERS on 20 Jan, 2008 05:55
-
:evil: having lots of trouble breaking belts.
would like to know where i can buy brand new pulley for the alternator.
1.6l diesel, AC , Power steering , deluxe model
i've already checked the alignment, new tensioner, ac pulley is new looking (and its a machined piece not stamped) and the alternator is new. -
#1 by BEEJERS on 22 Jan, 2008 08:18
-
come on, someone has to know where i can buy new pulleys.
-
#2 by Baselyne on 22 Jan, 2008 08:22
-
i could wire wheel mine and paint them, then they would be new
-
#3 by burn_your_money on 22 Jan, 2008 09:09
-
www.autopartsonlinecanada.com has them not sure if they are for AC or non though
-
#4 by njj_502 on 22 Jan, 2008 09:57
-
I got a pulley from carquest. Was actually VW part numbered and made in Germany.
-
#5 by myke_w on 22 Jan, 2008 13:18
-
it's listed under an audi part # last i checked... i'll look it up and get back to you, it's machined, not stamped.
-
#6 by njj_502 on 22 Jan, 2008 14:50
-
WAIT, I read this wrong. Thought you were talking about the tensioner pulley.... :roll:
Anyway found this on the net.....
Newer stuff
http://www.autopartswarehouse.com/search/?D=Vw+Alternator+Pulley&Ntt=Vw+Alternator+Pulley&Dx=mode+matchall&Ntk=Main&Ntx=mode+matchallpartial&N=4294966996&Nty=1
Older stuff
http://www.autopartswarehouse.com/search/?D=Vw+Alternator+Pulley&Ntt=Vw+Alternator+Pulley&Dx=mode+matchall&Ntk=Main&Ntx=mode+matchallpartial&N=4294966712&Nty=1 -
#7 by myke_w on 22 Jan, 2008 15:22
-
as far as I know from the pictures none of those is right, Those look like gas alt pulleys. The one you want is machined, and has part # 035903119
It's an audi number.and they were 50 bucks or more last time I bought them from the dealer..
If you want a pic I'd be glad to snap one.. -
#8 by njj_502 on 22 Jan, 2008 18:30
-
The site says that the photo is not vehicle specific. Also says it fits 1.6L as well but who honestly knows..... I guess for the price it would be worth a call.
Hope it helps! -
#9 by Baselyne on 22 Jan, 2008 21:51
-
what would be the differences between the two? Im guessing it's only spacing...?
I know the one on the gasser looks different than the one on the diesel
I'll check this closer tomorrow