-
SB/RA pump on place of JR?
by
carrizog60
on 19 Aug, 2007 14:28
-
hello
any complications on replacing a 9mm JR pump with a 10mm SB one?
-
#1
by
zaprzal
on 19 Aug, 2007 23:13
-
hello
any complications on replacing a 9mm JR pump with a 10mm SB one?
SB is 9mm
-
#2
by
carrizog60
on 19 Aug, 2007 23:49
-
whell, in the bosch number the 6 digit is a 0, so i suposed it was 10mm :idea:
-
#3
by
zaprzal
on 20 Aug, 2007 02:07
-
can you post full number here?
I had SB pump and it was 9mm. I changed plunger for 10mm tdi one.
-
#4
by
Audi80
on 20 Aug, 2007 02:27
-
Are you sure you got the Bosch number? Correct number for SB pump is 0 460 494 252.
-
#5
by
carrizog60
on 20 Aug, 2007 03:14
-
whell i got to ask hevendor again fora photo.
but its plug and play right?
-
#6
by
Audi80
on 20 Aug, 2007 03:23
-
but its plug and play right?
Yes it is.
-
#7
by
zaprzal
on 20 Aug, 2007 04:47
-
whell i got to ask hevendor again fora photo.
but its plug and play right?
yes, but you won't gain anything if you already have JR pump
-
#8
by
carrizog60
on 20 Aug, 2007 06:02
-
so whats new in the SB pump that the made her substitute the JR unit?
-
#9
by
carrizog60
on 21 Aug, 2007 23:31
-
the codes on the pump:
0 460 494 267
R328-5BT 4001
068 130 110 B
011 263 119816
so if the first number is bosch then is 9mm... :oops:
but it ends on 267 and not in 252 like audi80 said.
ayone know the diferences to the JR pumps?
-
#10
by
zaprzal
on 21 Aug, 2007 23:52
-
the codes on the pump:
0 460 494 267
R328-5BT 4001
068 130 110 B
011 263 119816
so if the first number is bosch then is 9mm... :oops:
but it ends on 267 and not in 252 like audi80 said.
ayone know the diferences to the JR pumps?
I don't know what are differences but I think you won't gain any power.
If I was you I would look for tdi 10mm head, and higher lift camplate from 1.9td aaz (not every aaz have this camplate)
-
#11
by
carrizog60
on 22 Aug, 2007 02:47
-
well, its a rebuilt pump...
mine has +350.000 km on it without being open so it was time for it.