Author Topic: Interest in adjustable IP sprockets? (Read 7224 times)

935racer · « **Reply #15 on:** September 20, 2006, 05:51:29 pm »

Anymore interest in adjustable sprockets? I have the means to make the custom hubs to mate these to our IDI pumps.

Kudagra · « **Reply #16 on:** September 20, 2006, 09:34:49 pm »

Yes Id like a adjustable IP pully and a lightened flywheel.

I can ship that flywheel anytime.

I was going to send it with the injectors...but I think the injectors might not make the trip being jostled around with a stock 200mm flywheel.

935racer · « **Reply #17 on:** September 20, 2006, 09:37:37 pm »

Ok I am back at the machine shop on monday so I will see what I can work out for the flywheels.

Tomorrow I'll get together with easy e and see what we can come up with the adjustable sprockets and hubs.

Kudagra · « **Reply #18 on:** September 20, 2006, 09:59:09 pm »

Im going to have to take a road trip one of these days.

935racer · « **Reply #19 on:** September 20, 2006, 10:37:26 pm »

Do it

zagarus · « **Reply #20 on:** September 21, 2006, 12:14:09 am »

i;ve been meaning to all summer, but alas, money disappears faster then you think.

2mn2 · « **Reply #21 on:** September 21, 2006, 08:15:40 am »

I am interested in an adjustable pump pulley.

935racer · « **Reply #22 on:** September 21, 2006, 10:05:55 am »

Ok seems there is some interest, I'll post up late tonight what I can do about custom hubs.

Justin · « **Reply #23 on:** September 21, 2006, 05:01:06 pm »

I am interested in the adjustable pulley idea for my TDI with the 17mm pump shaft as well as the 6lb flywheel/performance clutch idea.

Any idea on pricing for these for a ball park? dont worry I wont hold you to it.

later
Justin

935racer · « **Reply #24 on:** September 21, 2006, 07:55:01 pm »

Custom hubs will be in the 50-80 ballpark, still need to find a good source for the sprockets, Should be able to find a sprocket solution next week. 6lb flywheels will likely be in the $100-120 zone. I will definately post up final prices when I can get more things nailed down.

Justin · « **Reply #25 on:** September 21, 2006, 10:10:07 pm »

one more suggestion would be to place a locator hole in the pulley for the IDI guys and their timing hole

Later
Justin

935racer · « **Reply #26 on:** September 21, 2006, 10:25:34 pm »

Yeah thats already part of the plan, the only tricky thing is gonna be getting the keyway made in the hub. I think I am gonna have to use this cutter called a broach, I used one years ago, I'll see what I can come up with.

Author Topic: Interest in adjustable IP sprockets? (Read 7224 times)

935racer

935racer

935racer

2mn2

935racer

935racer

935racer