« previous next »
Pages: [1]

Author Topic: Exhaust port matching  (Read 2428 times)

June 22, 2006, 07:48:38 am

zooky

  • Junior
  • Offline
  • **
  • 71
Exhaust port matching
« on: June 22, 2006, 07:48:38 am »
just finished matching the intake ports, it was easy, not much materal to remove. The exhaust ports have more materal, almost 1/8 all around. That seems excessive, I dont want to cut too deep. Is there enough material there or should I just maybe do half. Polish or no polish, I searched and found conflicting results...
Logged
Reply #1June 22, 2006, 08:21:46 am

Dr. Diesel

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1341
Exhaust port matching
« Reply #1 on: June 22, 2006, 08:21:46 am »
there's theory that having a step up in size from ex. port to manifold helps out. Anti-reversion or something like that. Might be worth looking into just leaving it that way.
Logged
I repair, maintain and modify VW's and BMW's.
Good work done at affordable rates. Welding and fabricating, too.
Performance Diesel Injection's Super Pump: gotta have one!
Reply #2June 22, 2006, 08:31:29 am

zooky

  • Junior
  • Offline
  • **
  • 71
Exhaust port matching
« Reply #2 on: June 22, 2006, 08:31:29 am »
that makes sense, I'll probally match the manifold and do half on the head.
Logged
Pages: [1]
« previous next »