« previous next »
Pages: 1 [2]

Author Topic: mtdi PUMP  (Read 14749 times)

Reply #15September 03, 2013, 03:49:29 am

CRSMP5

  • Guest
Re: mtdi PUMP
« Reply #15 on: September 03, 2013, 03:49:29 am »
gotta swap them for the lines to line up..
Logged
Reply #16September 03, 2013, 07:47:02 am

libbydiesel

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 3399
Re: mtdi PUMP
« Reply #16 on: September 03, 2013, 07:47:02 am »
I kept the long delivery valves and bent the lines to fit on both of my personal mTDIs.  It's easy on the ALH and a bit harder but not too bad on the AHU/1Z.  Otherwise, a set of TDI or 1.6 delivery valves can be used.
Logged
Reply #17September 03, 2013, 07:54:25 am

8v-of-fury

  • Guest
Re: mtdi PUMP
« Reply #17 on: September 03, 2013, 07:54:25 am »
Judging by the fact that I have had 1.6 valves in my rover pump since installation.. id say no. Lol.

Yhe rover ones are too long. Ahu ot alh ones will work fine.
Logged
Reply #18September 03, 2013, 10:14:11 am

libbydiesel

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 3399
Re: mtdi PUMP
« Reply #18 on: September 03, 2013, 10:14:11 am »
Quote from: 8v-of-fury on September 03, 2013, 07:54:25 am
Judging by the fact that I have had 1.6 valves in my rover pump since installation.. id say no. Lol.

What are you saying no to?
Logged
Reply #19September 03, 2013, 10:18:02 am

8v-of-fury

  • Guest
Re: mtdi PUMP
« Reply #19 on: September 03, 2013, 10:18:02 am »
The last question asked.. I was answering.

It is not DI specific.
Logged
Reply #20September 03, 2013, 11:09:18 am

libbydiesel

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 3399
Re: mtdi PUMP
« Reply #20 on: September 03, 2013, 11:09:18 am »
I agree, either TDI or IDI delivery valves will work fine on an mTDI. 
Logged
Reply #21September 04, 2013, 07:11:55 pm

ToddA1

  • Veteran
  • Offline
  • ***
  • 434
Re: mtdi PUMP
« Reply #21 on: September 04, 2013, 07:11:55 pm »
Great...  that makes it easier.  My Landy pump has a cap at the top of the aneroid.  I'm guessing my adjustment screw is hiding under that?

Now onto the seal kit.  Any idea which I need?  Is there one kit that covers all seals in the body and LDA or will I need to piece a kit together? 

If the latter, I'm thinking I'll need the DGK121, and the LDA o-ring (1 460 210 347).  Does the diaphragm have a part number?

-Todd


Logged
Pages: 1 [2]
« previous next »