Author Topic: Exhaust gasket 85TD  (Read 2234 times)

June 05, 2013, 08:02:42 pm

dieselherb1

  • Veteran

  • Offline
  • ***

  • 354
Exhaust gasket 85TD
« on: June 05, 2013, 08:02:42 pm »
I need the turbo to manifold gasket,1.6TD(T3 turbo) trapazoid mount. Who sells it and what is part#

Reply #1June 05, 2013, 08:53:51 pm

fatmobile

  • Veteran

  • Offline
  • ***

  • 2926
    • http://www.geocities.com/vwfatmobile/
Re: Exhaust gasket 85TD
« Reply #1 on: June 05, 2013, 08:53:51 pm »
I don't think that needs a gasket.
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.

Reply #2June 05, 2013, 10:27:54 pm

bajacalal

  • Guest
Re: Exhaust gasket 85TD
« Reply #2 on: June 05, 2013, 10:27:54 pm »
I think Prothe sells them (on ebay) but I don't believe there was one there from the factory.

Reply #3June 06, 2013, 12:34:59 am

745 turbogreasel

  • Guest
Re: Exhaust gasket 85TD
« Reply #3 on: June 06, 2013, 12:34:59 am »
His turbos probably  aren't flat enough to seal.

Reply #4June 06, 2013, 11:56:18 am

damac

  • Veteran

  • Offline
  • ***

  • 531
Re: Exhaust gasket 85TD
« Reply #4 on: June 06, 2013, 11:56:18 am »
My first vw like 4 years ago was an 85 jetta turbo and it only had the gasket on the downpipe side.

Not one turbo motor I have come across since has had a gasket there and I never thought about it after reading around some forums.

Kind of wierd considering it doesn't seem like those pieces are very flat.  I just clean everything and spray some copper gasket lightly on each surface during reinstall and I haven't had a boost leak in any of them.
1985 turbo diesel jetta

Reply #5June 06, 2013, 02:14:58 pm

justiz00

  • Junior

  • Offline
  • **

  • 54
Re: Exhaust gasket 85TD
« Reply #5 on: June 06, 2013, 02:14:58 pm »
I have run his gasket set (turbo and dp) and they seal nicely. At 5 or 6 bucks why not. I needed to replace the dp side anyways.