Greddy Intercooler Install

[jpedro]

I have got a GREEDY intercooler that has 2.5" piping. just have to pull off the front bumper and mount it in there then run the piping. what size is the outlet OD on the Turbo and the inlet OD on the intake elbow? i need to order a couple silicone elbows and reducers from 2.5" just not sure on the sizes, and am to lazy to pull of the one i have there now. my turbo is a k24 and im in the process of using a garrett turbo off my old 1982 toyota landcruiser 3.4L diesel. it should work perfect for what i need.

[truckinwagen]

the turbo outlet and intake inlet are close enough to 2" to use 2" couplers with t-bolt clamps.

they are actually something like 1-7/8 or something like that, but 2" works fine.

-Owen

[GEE-BEE]

siliconeintakes.com will have our reducers, use a hump coupling if you need to have a slight angle

Any lined clamp s/s type is just as good as long as you bead the end's

cxracing.com is where I purchased my tubing from, just closer and better price..

Good Luck

[trav1856]

Can we get some pics? :-D