-
#30
by
ancient
on 05 Apr, 2006 21:35
-
Hi Jake, do you have a rebuild kit for Vnt-15 or vnt-17 turbo? thanks.
Let me know when you are interested; I hope to be offering these parts for a while. Look for other VW peformance parts coming from me in the near future as well!
Just remember that running a turbo until it stops working, IE: when the wheels hit the housings, will leave it needing much more than a rebuild kit but also possibly new shafts, wheels, housings, and other major parts, which are not always available and can get expensive! It is a wise strategy to rebuild high-mileage or hard-used turbos preventatively.
-
#31
by
fspGTD
on 09 Apr, 2006 03:41
-
I IM'ed you, would love to help with a VNT kit!
Remember folks: to ensure I get you the right parts for any special requests, I need your turbo model number, which can be found on a turbo's
identification plate. Thanks!
-
#32
by
jcVerville
on 26 Apr, 2006 21:27
-
Hi I have a 94 1.9 TD with small ***ty K03 Im looking for K24 + manifold!! to fit my engine. i'd like to know if you have some??
And for K03 do you have something to make it more powerful?? I know I can't go over 15 PSI or the wastegate may stay open. :( and the K24 you can go 25 PSI :)
-
#33
by
houseofdiesel
on 15 May, 2006 11:40
-
Can you source a rebuild kit for a K03-006/97818 (oe # 028-145-701J 98 Jetta AHU TDI) turbo? It was oil starved-big time shaft play and looks like some fins might be slightly bent...
Also for a K14 7009 92 534 0564 (oe 028-145-703E) just the upgraded parts.
Greg
-
#34
by
fspGTD
on 15 May, 2006 23:26
-
Greg - I may have kits in stock that will work for these applications, but I need to do some research on the part numbers to make sure. Let me look into this and I'll get back to you. Thanks!
jcVerville - I don't have any extra K24s currently available. I'd suggest searching the classifieds section, and if no luck posting a "wanted to buy" thread in there.
-
#35
by
Maarten
on 17 May, 2006 15:00
-
How much is the shipping to The Netherlands?
Do you sell shafts and compressorwheels too? (I bought a K24 with a damaged compressorwheel and shaft)
-
#36
by
fspGTD
on 31 May, 2006 23:16
-
Hey Maarten - unfortunately replacement wheels are not available for the 1.6lTD KKK K24 application.
I can ship one of my normally stocked Dieselicious turbo rebuild kits to Europe for $10 US.
-
#37
by
WesNye_ScienceGuy
on 28 Aug, 2006 21:11
-
Email sent. Thanks
-
#38
by
starrd
on 08 Sep, 2006 21:23
-
Jake, Email sent.
Thanks Don
-
#39
by
cubevandude
on 08 Sep, 2006 21:25
-
Is there a way to see the plate without removing the turbo?
91 Jetta TD
-
#40
by
LeeG
on 09 Sep, 2006 02:54
-
On my '91 I had to pull the rubber turbo-manifold tube and unbolt a heat shield from above turbo, then I had a good view of the tag on my KKK. Some cars got Garret turbos, not sure where their tag is.
-
#41
by
mercedesjones
on 04 Oct, 2006 01:55
-
Hi, do you still have kits for the 1.9 kkk? If so i'd like one.
Cheers,
-
#42
by
Spulen81
on 10 Oct, 2006 20:33
-
You have email. Thanks
-
#43
by
scopefrfd
on 11 Oct, 2006 05:31
-
interested in a K14 rebuild kit
-
#44
by
scopefrfd
on 11 Oct, 2006 05:31
-
also any ve pump seal kits?