« previous next »
Pages: [1]

Author Topic: Making a 1.9 NA?  (Read 2205 times)

August 31, 2009, 04:56:22 pm

catlin_cava

  • Veteran
  • Offline
  • ***
  • 1954
Making a 1.9 NA?
« on: August 31, 2009, 04:56:22 pm »
This sounds odd but we are looking at building a 1.9 N/A using an AAZ block. What will I need to make this motor have alot of torque. The Max speed of motor will be 100 to 130kph. and I'd rather not shift alot so i'm thinking i'll be staying in 3rd alot of times. I can't have a turbo of anysorts on it and the main reason is that in the 4cyl Mini series you can't have a force induction motor and I want a Diesel power VW for racing with. So Want do I have to do to get the most power out of it?
Logged
Catlin

2012 VW Golf 2.5 5speed Deep Black Pearl
1999.5 VW Jetta TDI Bosch .216mm injectors and Malone stage 2, soon 11mm pump and vnt 22(parked for the winter)
2010 VW Golf City 2.0L "Hers"
Reply #1August 31, 2009, 06:37:21 pm

spencebm

  • Veteran
  • Offline
  • ***
  • 686
Re: Making a 1.9 NA?
« Reply #1 on: August 31, 2009, 06:37:21 pm »
nasty pump, headers, port and polish the head, balance the engine, cam and valve train?   what am I leaving out?
Logged
Ben Spencer
Reply #2September 01, 2009, 04:35:12 am

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: Making a 1.9 NA?
« Reply #2 on: September 01, 2009, 04:35:12 am »
The 1.9 NA is a very fun engine to drive. You'll like it :)
Logged
Tyler
Reply #3September 01, 2009, 12:34:14 pm

ryanp

  • Veteran
  • Offline
  • ***
  • 269
Re: Making a 1.9 NA?
« Reply #3 on: September 01, 2009, 12:34:14 pm »
they exist in europe! 1Y engine code. There is one in my uncles yard that ran but has been stood a while. I doubt it would cost much if you sent someone to pull it!! they have larger ports than an AAZ and beefier bottom ends to cope with the revs aparently, the guy's from finland like them!

There is one in my garage waiting to go into my dad's Caddy! with a turbo bolted on though!

Ryan
Logged
Brand new TDi injector sets:
http://www.vwdiesel.net/forum/index.php?topic=25862.0

Golf Mk2 TDi Van - 250WHP
Reply #4September 01, 2009, 02:42:20 pm

catlin_cava

  • Veteran
  • Offline
  • ***
  • 1954
Re: Making a 1.9 NA?
« Reply #4 on: September 01, 2009, 02:42:20 pm »
I have a complete AAZ Short block. Would I be Able to use the AAZ Head? or do I need a NA head? and would a 1.6 Exhaust Manifold Fit? Since I can;t use any headers or custom parts...The Motor is custom but its a "Stock styled motor" lol. I Need the motor to rev high and have power till she blows up lol.
Logged
Catlin

2012 VW Golf 2.5 5speed Deep Black Pearl
1999.5 VW Jetta TDI Bosch .216mm injectors and Malone stage 2, soon 11mm pump and vnt 22(parked for the winter)
2010 VW Golf City 2.0L "Hers"
Reply #5September 01, 2009, 02:57:36 pm

MJF

  • Veteran
  • Offline
  • ***
  • 581
Re: Making a 1.9 NA?
« Reply #5 on: September 01, 2009, 02:57:36 pm »
The head is same in both engines. 1,6 exhaust manifold will fit, just like any 8v gasser manifolds. Maybe you could use exhaust manifold from 2,0 8v gasser?
Logged
'74 VW Scirocco TD
'86 Audi 80q 1,9TDic
'01 Audi A6q 2,5TDI
Reply #6September 01, 2009, 04:28:30 pm

catlin_cava

  • Veteran
  • Offline
  • ***
  • 1954
Re: Making a 1.9 NA?
« Reply #6 on: September 01, 2009, 04:28:30 pm »
I can get my hand on the 2.0 intake off of an 8V lol. Hmmmmm How Much torque Do you think I'll get? I need to get over 100ftlbs or more.
Logged
Catlin

2012 VW Golf 2.5 5speed Deep Black Pearl
1999.5 VW Jetta TDI Bosch .216mm injectors and Malone stage 2, soon 11mm pump and vnt 22(parked for the winter)
2010 VW Golf City 2.0L "Hers"
Reply #7September 01, 2009, 07:59:38 pm

Rabbit on Roids

  • Guest
Re: Making a 1.9 NA?
« Reply #7 on: September 01, 2009, 07:59:38 pm »
an aba intake or any sort of cross flow intake wont work.
Logged
Pages: [1]
« previous next »