« previous next »
Pages: [1]

Author Topic: Engine block expansion plug Q.  (Read 2111 times)

December 08, 2008, 10:04:08 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Engine block expansion plug Q.
« on: December 08, 2008, 10:04:08 pm »
There is an expansion/soft plug which fits into the transmission end of the 1.6 block. Removal of it allows access to the gear end of the intermediate shaft. Question: is this plug identical (36.6 mm) to the three coolant plugs on the firewall side of the block?

Do you guys use blue locktite when you insert these?
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #1December 08, 2008, 10:14:33 pm

Green79

  • User+
  • Offline
  • *
  • 27
Engine block expansion plug Q.
« Reply #1 on: December 08, 2008, 10:14:33 pm »
On my 1.5 it is exactly the same (36.6mm) as the other three. I would guess the 1.6 is the same... but that's just a guess.

I used a thin layer of blue RTV sealant on the plugs. If they fit correctly and the mating surfaces of the holes are clean, you shouldn't need any sealant. But, it never hurts to have an extra bit of insurance against leaks.
Logged
'79 1.5 Rabbit
Reply #2December 08, 2008, 10:20:50 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Engine block expansion plug Q.
« Reply #2 on: December 08, 2008, 10:20:50 pm »
I did some digging on internet: aviation grade permatex. Hope I can get it in a small amount.
Thanks 79
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #3December 09, 2008, 07:07:44 am

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
Engine block expansion plug Q.
« Reply #3 on: December 09, 2008, 07:07:44 am »
Quote from: "Dakotakid"
I did some digging on internet: aviation grade permatex. Hope I can get it in a small amount.
Thanks 79


You can and it's not very expensive. I bought a small container at the local Napa.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #4December 09, 2008, 09:09:16 am

arb

  • Guest
Engine block expansion plug Q.
« Reply #4 on: December 09, 2008, 09:09:16 am »
Quote from: "zukgod1"
Quote from: "Dakotakid"
I did some digging on internet: aviation grade permatex. Hope I can get it in a small amount.
Thanks 79


You can and it's not very expensive. I bought a small container at the local Napa.


Ditto. Its what I use.
Logged
Pages: [1]
« previous next »