Special Socket for removing turbo?

[allsierra123]

Cant seem to find a socket to fit it without slipping? What size is it?

[allsierra123]

ok It didnt look like a 12 point to me. Had a brain freeze I guess its cold out there. While I have it off how hard is it to freshen up with one of those rebuild kits? Its the K03

[burn_your_money]

You need to use a 3/8" socket or a cut down 1/2" one for the inner most bolts.

If you do decide to freshen up the turbo, check the shaft for wear. KO3s are known for dying.

[vanagonturbo]

or an offset 12mm 12pt. box end wrench works fine too.