Author Topic: for those with diferent valve covers (Read 11022 times)

carrizog60 · « **Reply #15 on:** April 12, 2008, 08:37:10 am »

why cant i use the studs that are in the 1.6?
is the bolts are a thing to do?

stewardc · « **Reply #16 on:** April 12, 2008, 10:48:53 am »

Quote from: "carrizog60"

why cant i use the studs that are in the 1.6?

You can, but the rubber gasket is an upgrade and requires a shouldered stud.

cyrus #1 · « **Reply #17 on:** April 12, 2008, 12:26:37 pm »

Quote from: "stewardc"

You can, but the rubber gasket is an upgrade and requires a shoulderless stud.

Fixed. :wink:

Baselyne · « **Reply #18 on:** April 12, 2008, 01:30:04 pm »

both of those valve covers look great, I think I am in the market for a G60 cover if anyones selling

GTD. · « **Reply #19 on:** April 12, 2008, 01:55:54 pm »

Quote from: "stewardc"

The new AAZ, has no available cover so I powdercoated that.

Can the G40 (PY code) be made to fit the AAZ?

Back on topic, I have fitted both a polished 2.0 8v (2E code) and a G60 (PG code to my 1.6 GTD (SB code) and haven't had to modify anything other than fit the neoprene gasket kit from VW

stewardc · « **Reply #20 on:** April 12, 2008, 03:05:49 pm »

Quote from: "GTD."

I WANT THAT ! Does anyone have a spare that they would ship to me

I'm sure it would fit.

GTD. · « **Reply #21 on:** April 13, 2008, 11:28:14 am »

Quote from: "stewardc"

Quote from: "GTD."

I WANT THAT ! Does anyone have a spare that they would ship to me I'm sure it would fit.

probably best to search on German Ebay for "G40 Ventildeckel"
link

Unfortunately they were only fitted to the Polo G40 (1.4 supercharged engine) so aren't very common.

VW part No. 030 103 475 F

Turbinepowered · « **Reply #22 on:** April 13, 2008, 12:45:23 pm »

Quote from: "libbybapa"

I only count 3 spark plugs. Are the 3-cyl engines the same length of block?

Andrew

There are four plug wires there...

GTD. · « **Reply #23 on:** April 13, 2008, 01:32:56 pm »

The g40 (PY) which has the rocker cover that might fit the AAZ has the same block and head casting as a 1.3 (2G) (I have one of these in my garage)
if you need any sizes/dimensions of the rocker cover let me now and Ill measure it up (bearing in mind mine is the standard pressed steel cover)

Above 1.3 2G petrol
Below 2.0 2E petrol

2g inside

MontanaGTD · « **Reply #24 on:** April 13, 2008, 02:38:05 pm »

G40 one doesnt fit! I have a G40 and a GTD and the covers very definatley dont fit!

stewardc · « **Reply #25 on:** April 13, 2008, 02:40:48 pm »

Quote from: "GTD."

The g40 (PY) which has the rocker cover that might fit the AAZ has the same block and head casting as a 1.3 (2G) (I have one of these in my garage)
if you need any sizes/dimensions of the rocker cover let me now and Ill measure it up (bearing in mind mine is the standard pressed steel cover)

Above 1.3 2G petrol
Below 2.0 2E petrol

2g inside

Send me the dimensions(email or pm). My AAZ cover hasn't been installed yet and I can compare.

GTD. · « **Reply #26 on:** April 13, 2008, 03:25:50 pm »

Quote from: "MontanaGTD"

G40 one doesnt fit! I have a G40 and a GTD and the covers very definatley dont fit!

but your GTD is an SB with the 8 studs along the edge his is an aaz (MK3) with the 3 in the middle?

stewardc · « **Reply #27 on:** April 13, 2008, 04:24:30 pm »

Yeah, a GTD is a 1.6. The AAZ is a 1.9.

carrizog60 · « **Reply #28 on:** April 14, 2008, 12:02:28 am »

what bolt sizes needed to the 2.0 cover?
any pics?
i dont know what you mean by shoulderness ... :oops:

MontanaGTD · « **Reply #29 on:** April 14, 2008, 01:50:04 pm »

What dimensions you need? between the bolts and the exterior dimensions? I have a couple of them!

Author Topic: for those with diferent valve covers (Read 11022 times)

stewardc

Baselyne

stewardc

stewardc

stewardc