11 mm plunger in a 1.6TD

[la_poire]

can i put a 11 mm plunger in my 1.6 td with AAZ dual stages injectors , gtd nozzles, and peugeot camplate? with a 20 mm axles (peugeot)? it is not too big? with 20 psi boost, AAZ head, fmic thanks

[Benjamin]

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

[la_poire]

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

i can use fiat camplate in a IDI? if i can it's great, i fit the pump without modification  

[la_poire]

any 11mm wich turns Right (like your vw) will fit your pump, i dont see why you wanna use another camplate, unless you are realy knowing what you are doing, but than you shouldnt ask the question

Greetz, Benjamin

my 11 mm plunger came from tdi 2l fiat, fiat tdi camplate is ok for idi application?

[la_poire]

You don't want to use a TDI camplate on an IDI engine.

Andrew

it's the reason, i want to use peugeot camplate

[DA-BRT]

I think you're talking about a Fiat Croma TDID pump. Yes it can be fit at our IDI's. The camplate is somewhere between our IDI and DI. Defenitely not suitable for our IDI's (replace with electronic DI camplate)

[mdonau]

i am running a xud12 (2,1L TD) pump with 10mm plunger..
my 11mm wont fit to the camplate... pump works great on my AAZ with 1Z timingbelt-wheel!

[dillenger1]

I used a LDA and 10mm plunger from a peugoet 505 td.While dissassembling the pump i measured some things and the camplate was the same as the one for the 1.6na