« previous next »
Pages: 1 2 3 [4] 5

Author Topic: Turbo exhaust  (Read 15447 times)

Reply #45November 11, 2008, 04:18:23 am

stewardc

  • Guest
Turbo exhaust
« Reply #45 on: November 11, 2008, 04:18:23 am »
Quote from: "Smokey Eddy"
what kind of a head is that in those pictures?


TDI
Logged
Reply #46November 12, 2008, 03:53:09 pm

1life2live

  • Guest
Turbo exhaust
« Reply #46 on: November 12, 2008, 03:53:09 pm »
Quote from: "gilligan5000"
make one man. . . $60 in bends, $18 4-bolt flange, $20 flex pipe, 6-18 beers and like 3 hours.  Plus you get to say you made it!  I did 3" turbo back, side exit before the rear.



Good luck, and have fun


I am ready to build my own downpipe and exhaust and was wonderring what bends you used for the downpipe. It looks like you cut up a couple "U" bends to make this setup. i just want to make sure i buy the right stuff and only have to order from someone once.
Logged
Reply #47November 12, 2008, 04:10:09 pm

53 willys

  • Guest
Turbo exhaust
« Reply #47 on: November 12, 2008, 04:10:09 pm »
I did my whole exhaust with this kit...full 3" turbo back....
http://store.racing-solutions.org/3on4rasuexbu.html
this place is cheap and easy to deal with... 8)


I made all my flanges...

Logged
Reply #48November 13, 2008, 08:23:04 am

1life2live

  • Guest
Turbo exhaust
« Reply #48 on: November 13, 2008, 08:23:04 am »
Quote from: 53 willys
I did my whole exhaust with this kit...full 3" turbo back....


did you use the rest of the bends for the rest of the exhaust system and just buy straight pipe from your local auto parts store. if so im guessing there are extra bends left after building the dp to do the rest of the exhaust. Just want to make sure i understood you correctly
Logged
Reply #49November 13, 2008, 08:39:58 am

arb

  • Guest
Turbo exhaust
« Reply #49 on: November 13, 2008, 08:39:58 am »
I wish they had a 304 S.S. kit...
Logged
Reply #50November 13, 2008, 10:42:21 am

VW_Commuter

  • Veteran
  • Offline
  • ***
  • 355
Turbo exhaust
« Reply #50 on: November 13, 2008, 10:42:21 am »
Quote from: "1life2live"
did you use the rest of the bends for the rest of the exhaust system and just buy straight pipe from your local auto parts store. if so im guessing there are extra bends left after building the dp to do the rest of the exhaust. Just want to make sure i understood you correctly


Yeah, what he asked. :P
Logged
Greg

'06 Golf TDI traded in for a '12 Jeep Rubicon (the Phatbox is available)
'91 Jetta TD, a work in progress (I'll do a build thread when I start in earnest)
'65 Notchback, a project not yet started
Reply #51November 13, 2008, 12:27:46 pm

VW_Commuter

  • Veteran
  • Offline
  • ***
  • 355
Turbo exhaust
« Reply #51 on: November 13, 2008, 12:27:46 pm »
I'm trying to decide on either 2.5" or 3".  If I'm only going to run 15PSI max, what do you guys think?
Logged
Greg

'06 Golf TDI traded in for a '12 Jeep Rubicon (the Phatbox is available)
'91 Jetta TD, a work in progress (I'll do a build thread when I start in earnest)
'65 Notchback, a project not yet started
Reply #52November 13, 2008, 12:47:51 pm

TurboJ

  • Veteran
  • Offline
  • ***
  • 661
Turbo exhaust
« Reply #52 on: November 13, 2008, 12:47:51 pm »
Anybody know where to get stainless steel flex pipes for a good price?
Oh, and it wouldn't hurt if they were in Europe :)
Logged
---------------------------------------
Jetta II 1.6 TD 'Project 200'
Reply #53November 13, 2008, 01:20:56 pm

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
Turbo exhaust
« Reply #53 on: November 13, 2008, 01:20:56 pm »
Quote from: "VW_Commuter"
I'm trying to decide on either 2.5" or 3".  If I'm only going to run 15PSI max, what do you guys think?


Wont matter, the larger exhaust would still be beneficial.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #54November 13, 2008, 01:26:02 pm

53 willys

  • Guest
Turbo exhaust
« Reply #54 on: November 13, 2008, 01:26:02 pm »
Quote from: 1life2live
Quote from: "53 willys"
I did my whole exhaust with this kit...full 3" turbo back....


did you use the rest of the bends for the rest of the exhaust system and just buy straight pipe from your local auto parts store. if so im guessing there are extra bends left after building the dp to do the rest of the exhaust. Just want to make sure i understood you correctly

yes I had some 3" straight from another project....I only need about 3' of straight.
I had 1 180* bend left over....I probably could have used it but I got sick of fitting pipes.. :lol:
Logged
Reply #55November 13, 2008, 01:28:01 pm

53 willys

  • Guest
Turbo exhaust
« Reply #55 on: November 13, 2008, 01:28:01 pm »
Quote from: "TurboJ"
Anybody know where to get stainless steel flex pipes for a good price?
Oh, and it wouldn't hurt if they were in Europe :)

I got mine from the same place I got my piping kit...
http://store.racing-solutions.org/flco.html
they are just as cheap as summit racing on flex couplers....but they are not in Europe....
Logged
Reply #56November 13, 2008, 05:08:17 pm

TurboJ

  • Veteran
  • Offline
  • ***
  • 661
Turbo exhaust
« Reply #56 on: November 13, 2008, 05:08:17 pm »
Thanks mate, those are OK prices, but in my case the shipping costs would kill the deal...
I guess I'll just have to keep browsing through the eBay :)
Logged
---------------------------------------
Jetta II 1.6 TD 'Project 200'
Reply #57November 14, 2008, 02:01:27 am

1outof5

  • Guest
Turbo exhaust
« Reply #57 on: November 14, 2008, 02:01:27 am »
Quote from: "TurboJ"
Thanks mate, those are OK prices, but in my case the shipping costs would kill the deal...
I guess I'll just have to keep browsing through the eBay :)


Is England to far? I know a few people on the vwcaddy.com have built theirs with pre-manufactored bits. Don't have the links off hand but will later.
Logged
Reply #58November 14, 2008, 11:19:31 am

TurboJ

  • Veteran
  • Offline
  • ***
  • 661
Turbo exhaust
« Reply #58 on: November 14, 2008, 11:19:31 am »
Quote from: "1outof5"
Quote from: "TurboJ"
Thanks mate, those are OK prices, but in my case the shipping costs would kill the deal...
I guess I'll just have to keep browsing through the eBay :)


Is England to far? I know a few people on the vwcaddy.com have built theirs with pre-manufactored bits. Don't have the links off hand but will later.


Europe would be just fine. I have one quote from an eBay seller, and it's quite good price, but the shipping cost is a bit steep.
I need two flex pipes anyway, one for the turbine outlet and one for the separate downpipe for the waste gate..
Logged
---------------------------------------
Jetta II 1.6 TD 'Project 200'
Reply #59November 14, 2008, 01:46:34 pm

monomer

  • Veteran
  • Offline
  • ***
  • 414
Turbo exhaust
« Reply #59 on: November 14, 2008, 01:46:34 pm »
flex section for the wastegate!? talk about overdoing it.



How does a 2.5 run right out of the passengers side fender sound? Smoke the ricer in more ways than one.

Thats the plan for me. SS tubings and bends are easily bought from truck supply houses.
Logged
-1983 Rabbit LX 1.6/1.9 VNT build


Michigan Volkswagen Enthusiasts
www.michiganvw.org
Pages: 1 2 3 [4] 5
« previous next »