Author Topic: My Mk1 1.6TD build...lots of pics (Read 23481 times)

Fionn · « **Reply #30 on:** November 17, 2007, 02:48:21 am »

Where did you pick up the braided oil and coolant lines, or did you have them made up?

Greasecar · « **Reply #31 on:** November 17, 2007, 05:02:43 pm »

Here is one source for braided hose and most other things you could think of.

http://www.mcmaster.com/ctlg/DisplCtlgPage.aspx?ReqTyp=CATALOG&CtlgPgNbr=231&RelatedCtlgPgs=231,232,233,234,237&term=Braided%2bStainless%2bSteel%2bHose&sesnextrep=620654500377954&ScreenWidth=1024&McMMainWidth=721

cowboybootlegger · « **Reply #32 on:** November 17, 2007, 07:29:54 pm »

Quote from: "Fionn"

Where did you pick up the braided oil and coolant lines, or did you have them made up?

I had them made to spec by a hydraulic hose shop, they were about $40 each. They're teflon, have a pressure rating of 1500psi and temp rating of 400 degrees. Most hydraulic shops will make you just about any hose or line you need while you wait. They can use a fairly wide variety of fittings as well.

Fionn · « **Reply #33 on:** November 18, 2007, 12:29:26 am »

Thanks a million, will look into getting them made locally then.

Baxter · « **Reply #34 on:** November 26, 2007, 02:24:00 pm »

These Stickers are ready.
There isn't loads of them.
CowboyBootlegger, can you drop me a PM so I can send your freebies.
Thanks for the help.
Simon.

Author Topic: My Mk1 1.6TD build...lots of pics (Read 23481 times)

Baxter