fatmobile on 15 Jun, 2024 01:17 in IDI Engine
This one has me confused too. I know when it's not pulling fuel the accelerator doesn't increase RPMs. Did you try swapping a regular/input banjo bolt in place of the "OUT" banjo bolt?Just to see if it's pumping fuel through the pump and maybe see if the OUT bolt restrictor hole is clogged.
ORCoaster on 14 Jun, 2024 23:43 in IDI Engine
What a crazy bunch of weirdness. Glad it is on your ride.
Buji88 on 14 Jun, 2024 10:32 in IDI Engine
Got it sucking fuel last by itself, and it looks good in that regard. I kind of got it running last night, but only on one cylinder #3 was getting plenty of fuel. With glow plugs its actually fairly stable, shut them off it will slowly stall. but Im not sure why that is happening. The other cylinders seem to be getting a dribble compared to 3 which actually squirts. So I'm guessing there is a massive air bubble in the pump. Going to pull all the lines and start bleeding directly out of the delivery valves and work out from there.I also have no throttle control, pulling on the lever does nothing for engine speed at all, but Im assuming that could be related to the issue that 3 is only getting adequate fuel/pressure. Weirdly, it starts pretty easy, considering only one cylinder seems to be functioning.
fatmobile on 14 Jun, 2024 01:12 in IDI Engine
Have you tried swapping a regular banjo bolt for the regular banjo bolt? 10 should be enough vacuum to pull fuel through the pump. If it isn't, the OUT bolt might be plugged. If it pulls fuel with a regular/unrestricted banjo but not with the OUT bolt then that's part of the problem.
Buji88 on 13 Jun, 2024 10:13 in IDI Engine
Well the saga continues. Got it all back together and on last night, but now there is no output of the pump from the delivery valves and you can see nothing is getting pushed out the return line. I tried priming the pump with my hand vac initially and it led to this question. Is 10 inch of vacuum to much to get fuel flowing (hand vac pump on the fuel outlet)? That feels pretty high feeding from the tank. It also holds that vacuum easily. I am starting to wonder if my filter is plugged since before all this happened, I drained a lot of fuel out of the tank by mistake, and it seems like it progressed slowly from that point.
fatmobile on 13 Jun, 2024 01:57 in Parts for Sale/Wanted
Good, glad someone can use it.I have a pretty good collection myself, but even then somehow this ad puts me at ease. That I'm not the only one and there are other stashes out there.Not another one of those hard to find parts quite yet, if you know where to look. Real common to find a rabbit with these missing or partially there. I should do a walk-around of my buddy's rabbit, see if any are missing
ORCoaster on 12 Jun, 2024 22:01 in Parts for Sale/Wanted
Don't need em though, so if others do let me know. I already can tell you that the one with the bump on it is gone. One of the members here has claimed it.
fatmobile on 12 Jun, 2024 01:48 in Parts for Sale/Wanted
Nice collection there.
ORCoaster on 11 Jun, 2024 22:30 in Parts for Sale/Wanted
These are what I have on hand in the shed. Looks like a couple of pairs of regular ones and a mismatched set of the raised rubber bumper and the other style.Got the new account working for these parts. What a royal pain in the patootie.https://imgur.com/a/fj49VIk
ORCoaster on 11 Jun, 2024 22:00 in IDI Engine
I saw a guy on Marketplace that had a ton of starters. If I can find that again I will link to it and you can contact him directly.