020 transmission flange seal size - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• 020 transmission flange seal size by Zulfiqar on 19 May, 2007 04:18
• Hi,
  
  Im about to replace my clutch disc, and Ive also seen that both flange seals are leaking, Ive arranged a clutch disc and pressure plate, but I dont have the flange seals.
  
  If any of you people know that seal sizes, (theyre stamped on the seals themselves) please post them up, because as this golf is my daily driver, it would take me forever to find the seals as I have a tight working schedule.
  
  If I knew the sizes I would just go and buy them from a seal specialty shop.
• #1 by burn_your_money on 19 May, 2007 05:55
• I'll try to remeber to check tonight
• #2 by Zulfiqar on 19 May, 2007 06:57
• thanks - ill be waiting.
  
  if you can eyeball the selector eyelet shaft seal also - it'll be great
• #3 by rallydiesel on 19 May, 2007 08:55
• This is what is stamped on my new set:
  
  DGS 50 - 65 - 10 WDF01
  
  It also says KACO    33 on the other side.
• #4 by Op-Ivy on 19 May, 2007 09:32
• http://scirocco.org/gears/
  
  At the bottom of the page check your tranny code then the flange size.
  
  Mine are the 90mm. I would assume most diesel ones are as well.
• #5 by Zulfiqar on 19 May, 2007 09:33
• excellent
  
  so its 10mm wide, 65mm outer collar, 50mm inner lip. (it should be directional also)
  Great, thanks a million
  
  op ivy -checked the box, its an ACH tranny 90 mm flanges.
• #6 by rallydiesel on 19 May, 2007 09:52
• Yes, there were arrows pointing both ways.