-
FS: 1.6 TD bits by addautomotive on 15 Feb, 2007 06:26
-
I'm still trying to make room in my garage. All prices are US$ "OBO", will be shipped monday.
I had some shipping screw-ups last time around, so PLEASE send me your full name, address and phone number if you are buy anything. I HATE sending parts to "screen" names.
-1.6 TD oil filter flange $30 sold![/i]
-1.6TD conrods $50sold![/i]
-1.6TD crank $75 (add conrods for $25)
-1.6TD oil pan $30sold![/i]
-1.6TD steel coolant line $20
-1.6TD oil pump $20
-1.6 TD 0.50 over pistons $100. sold![/i] About these pistons: They do show some scuffing, and look like they are a bit "burnt" just below the precups. The pictures show this pretty clearly... I've posted the worst pics, not the best (this ain't ebay
)
They are not perfect, hence the price, but I have certainly used worse. In fact, if they don't sell I WILL use them in my samurai. If you buy the pistons, I'll throw in the conrods for $25 as long as someone else hasn't bought them.
Bunch of miscellaneous stuff... Make an offer:
-IP brackets(see pictures)
-PS & alternator brackets(see pictures)
-front & rear cover plates(see pictures)
-engine mounts
-vacuum pump
As always, I do my very best to describe parts accurately. However, if you aren't happy I will gladly return your money. If there are shipping screw-ups or delays, I generally refund the money until you get the part. This is a hobby, not a business, so I really just want everyone involved to be happy. -
#1 by addautomotive on 15 Feb, 2007 06:35
-
Pistons:
crank:
IP brackets: 1.9(early) & 1.6
Power steering & alt mount: I believe these are from a non-AC car... maybe someone could have a look and confirm
Miscellaneous:
[/list] -
#2 by fatmobile on 16 Feb, 2007 00:43
-
The alternator brackets look like A2 brackets.
AC or not.. both use the same bracket.
Nice little selection. -
#3 by evilabe on 20 Feb, 2007 18:07
-
do you have an intermediate shaft pulley that isn't chewed up on the inside(like mine)? This is for a 91 US Eco motor... I'm assuming all of the 1.6td's all use the same pulley???
Thanks -
#4 by addautomotive on 16 Mar, 2007 05:41
-
UPDATE:
A couple items were very late being sent out, my apologies to Calgary Mclean & Darkness_is_spreading. I've PM'd you with tracking #s.
I have another 1.6TD coming in soon, hopefully this weekend. I went out to hear it run last week, and it is SWEET. Probably a better engine than in my Samurai, started right up after sitting for 3 weeks, and no smoke at all. It's a 91 with k24 turbo. -
#5 by Turbinepowered on 18 Mar, 2007 17:14
-
I'm gonna kick this back up to the top for a bit...
I'm gonna take a stab at making a nice little 1.5 t-diesel. Toward that goal, going to need some parts, and I figure I ought to support a VWDieseler before I support random salvage yard(s).
Happen to have a 1.6TD injection pump coming up in your parts? Also intake manifold, as the Dasher's present one is obviously an NA manifold... Will the 1.6 oil pumps fit in a 1.5 without issue?
Might need the turbo and manifold if someone snipe-bids on flea-bay for VDub_Fun's K03 and manifold... I'd prefer something smaller than a K24, but if that's what you have and it's in the right price range I'll be cool with it.
So what's the scoop, good sir? -
#6 by addautomotive on 19 Mar, 2007 06:14
-
Well the guy I'm buying the current engine from hasn't had time to pull it. We had quite a bit of snow on Friday, and he was into the rum on Saturday. I'm hoping he'll have it pulled this week.
Selling the turbo, manifolds & IP as a package would certainly make my life easier. You'd probably want the oil pan & return line too, correct? How's $300 for everything sound? -
#7 by Turbinepowered on 19 Mar, 2007 17:24
-
Quote from: "addautomotive"
Selling the turbo, manifolds & IP as a package would certainly make my life easier. You'd probably want the oil pan & return line too, correct? How's $300 for everything sound?
Sounds good to me too. When you get the chance, a shipping quote for the lot to 29670 would be very much appreciated and likely necessary. No rush on the parts, I'm headed to Florida for three days to fix a ceiling, so I won't be back around until Friday or so. -
#8 by Kudagra on 19 Mar, 2007 17:34
-
How much for the peice in the center of this picture...
Ive moved so the new zip code would be 66006.
I bought that oil cooler set up from you a while back. -
#9 by addautomotive on 19 Mar, 2007 18:37
-
Quote from: "Turbinepowered"
Sounds good to me too. When you get the chance, a shipping quote for the lot to 29670 would be very much appreciated and likely necessary. No rush on the parts, I'm headed to Florida for three days to fix a ceiling, so I won't be back around until Friday or so.
Perfect. I won't be able to give you an exact shipping quote until I have the parts off & weighed. I've gotten pretty good at "guestimating" shipping though, and I'd say you'd be looking at $50-60.Quote from: "Kudagra"How much for the peice in the center of this picture...
Ive moved so the new zip code would be 66006.
I bought that oil cooler set up from you a while back.
Tell ya what. It would be $20 for the one piec, or $5 if you take all three. I need to get rid of some of this stuff. -
#10 by Turbinepowered on 20 Mar, 2007 18:50
-
PM for you, sir.
-
#11 by Kudagra on 21 Mar, 2007 05:29
-
Quote
Tell ya what. It would be $20 for the one piec, or $5 if you take all three. I need to get rid of some of this stuff.
uh...Ok...Ill put them with the ones I have that I cant get rid of. How much shipped to 66006? -
#12 by addautomotive on 21 Mar, 2007 06:45
-
I was only being a smartass. You can have it for $5. I'll try to get a quote tonight.
FWIW; I might have another core engine with a blown headgasket. Downside is it's in my samurai
-
#13 by addautomotive on 23 Mar, 2007 06:55
-
Quote from: "Kudagra"
uh...Ok...Ill put them with the ones I have that I cant get rid of. How much shipped to 66006?
Jeeze, according to the online calculator it will be $18 to ship; the box is quite bulky. I may take it down to the post office and see if there is a different way to send it for cheap -
#14 by Kudagra on 23 Mar, 2007 10:26
-
Quote
Jeeze, according to the online calculator it will be $18 to ship; the box is quite bulky. I may take it down to the post office and see if there is a different way to send it for cheap
Just slap a label on it and ship it without a box. It can be done. How bad can it get bent? Wont have to worry about customes trying to open it.