12mm plunger (brand new) - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• 12mm plunger (brand new) by Benjamin on 31 Jan, 2007 08:35
• a brand new 12mm plunger, its original for a cummins 4bt 3.9l
  its in a CLOSED package.
  
  
  
  price: 150€
  
  Shipping (it will be send from Belgium)
  to the nederlands (holland) 10€
  to europe and USA 25€
  canada 35€
  
  you can pay with paypal, we can also do this over ebay but the ebay-fees are for you.
  
  Greetz, Benjamin
  
  PM or [email protected]
• #1 by jtanguay on 31 Jan, 2007 09:31
• hmmmm with this, what else would i need to convert an old 1.6TD pump to mech TDI?
• #2 by Benjamin on 31 Jan, 2007 11:33
• i thought at least a 20mm shaft, and a tdi camplate (the offset on the rear side is not the same as older camplates)
  
  Greetz, Benjamin
• #3 by jtanguay on 31 Jan, 2007 20:29
• Quote from: Benjamin

  i thought at least a 20mm shaft, and a tdi camplate (the offset on the rear side is not the same as older camplates)
  
  Greetz, Benjamin

  
  
  hmm i was just wondering about buying the pieces to make my own m-TDI pump... as this would be a great start  where can I find a 20mm shaft? will that 'fit' in a 1.6TD pump??? does the pump need to be machined to accept the larger shaft???
• #4 by Seafarer12 on 01 Feb, 2007 14:07
• Quote from: jtanguay

  Quote from: Benjamin

  i thought at least a 20mm shaft, and a tdi camplate (the offset on the rear side is not the same as older camplates)
  
  Greetz, Benjamin

  
  
  hmm i was just wondering about buying the pieces to make my own m-TDI pump... as this would be a great start  where can I find a 20mm shaft? will that 'fit' in a 1.6TD pump??? does the pump need to be machined to accept the larger shaft???

  
  
  Different pump. Pumps off of 4bt's have a 20mm shaft. The vw's have a 17mm. I have heard of people running 17mm shaft with a 12mm pump head with no problems. I think the only problem would be if you were really running it all out you might snap the shaft.
• #5 by Benjamin on 01 Feb, 2007 14:44
• i'm not a vw expert, but i thought TDI's have 20mm shafts, i believe late TD's also. TDI's have an other profile camplate, i dont know you can become the same pressure rate with a TD camplate in a TDI.
  On the rear side of the camplate you have the 2 pins, i think the 20mm pumps got a other offset than the 17mmshaft-pump camplate's.
  
  i ever had a 'newer' camplate in my 'old' pump, it was my first plungerswap, when the pump was mounted on the engine it was ticking loud, much heat (watertemp), much smoke, and very bad running was the problem.
  
  Anyway, who want this 12mm plunger    is the price to high or is there just no intrests???
  
  Greetz, Benjamin