IP Bearing tolerance - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• IP Bearing tolerance by kuggkrans on 09 Jan, 2007 02:01
• Does anybody know what tolerance the bearing have on the input shaft?
  
  I have measured hte shaft to 16,9975 mm
  and the outer bearing to 17,038 mm
  and the inner bearing to 17,030 mm
• #1 by kuggkrans on 09 Jan, 2007 06:10
• sorry it should be
  
  I have measured hte shaft to 16,9775 mm
  and the outer bearing to 17,038 mm
  and the inner bearing to 17,030 mm
• #2 by Giles@PerformanceDiesel on 09 Jan, 2007 19:39
• hi
  
  the max tolerance for the drive shaft bushings is .15mm as measured
  in the side to side where belt pulls.
  
  hope this helps.
  
  we measure it with a special tool and a dial indicator while moving the
  shaft back and forth and a handle extension on the DS.
  
  Giles