-
hey,more hillfolk videos
by
macsdub
on 05 Oct, 2006 00:49
-
-
#1
by
Kudagra
on 05 Oct, 2006 05:02
-
haha Nice.
I looked at all 9. Im glad you rigged up a mount for the camera.
-
#2
by
jtanguay
on 05 Oct, 2006 09:56
-
nice jumps
zippy little car man
-
#3
by
SMOKEYDUB
on 05 Oct, 2006 16:52
-
sweet man. By the sounds of the video it doesnt hold a gear very long what is the redline? it just doesnt seem to rev that well. im not saying it slow its just kind of how it sounds. Thanks for the vids.... in no way am i trying to put your car down its definetly cool :twisted:
-
#4
by
Darkness_is_spreading
on 05 Oct, 2006 19:35
-
If only a Ricer was behind you when you launched the smoke bomb
Ya what is the redline on the car.....
-
#5
by
RabbitJockey
on 05 Oct, 2006 19:38
-
my car smokes almost just like yours haha
-
#6
by
macsdub
on 06 Oct, 2006 07:56
-
sweet man. By the sounds of the video it doesnt hold a gear very long what is the redline? it just doesnt seem to rev that well. im not saying it slow its just kind of how it sounds. Thanks for the vids.... in no way am i trying to put your car down its definetly cool :twisted:
I SHIFT AROUND 4400 oops caps
this ach box is a little short,i blew my 7a box
so just get it in top gear as fast as ya can,and let the torque pull ya
i was hittin that jump at like 75 mph or so..........
it bulls like a train from 2200 to 4000 or so
i wanna build a 7a box with a 3.67 so it can really stretch its legs
right now its sort of like an idi td with a close ratio box,i need more gear
1st is useless,dont even bother gettin on it
and thats all wheelspin,not clutchslip
:wink:
-
#7
by
macsdub
on 08 Oct, 2006 07:38
-
im thinkin somethin like my old 7a box with a 3.67 will help out the gearing a bunch
it needs to stay in that sweet spot between 2000-4400
even with that short box,and all that stupid shiftin,itll still cut mid 14's 1/4 mile times
-
#8
by
SMOKEYDUB
on 08 Oct, 2006 13:00
-
cool man. i just shoved a gasser tranny i think its a acn with a 3.67 r/p and it works amazing. of course with a 1.6 its hard to get off the line when your driving through the city well i mean harder than the 3.94 r/p. great gaering and now i have wicked to speed i can hit like 195 at 4500 now, it will pull to like 5700 rpm in 5th but im scared of these tires so i havnt done it yet.
-
#9
by
SMOKEYDUB
on 08 Oct, 2006 13:02
-
hey hilfolk have you ever thought of double shifting if you have that much torque? it may work out well. maybe give it a try and let us know.
-
#10
by
macsdub
on 08 Oct, 2006 17:16
-
yea i can shift 1to3 to5
or 1-2,then 4th then 5th
that one works good,it likes to pull that way
gotta build a better geared box still though
basically i use 1st to get it rollin off the line,then i can go for 2nd immediately
-
#11
by
A2TD
on 13 Oct, 2006 11:55
-
Hilfolk, why don't you just install an 02a/02j, and be done with it. 020 trannys are horrible at holding any high torque applications, and none of them have gearing which compliments the TDI powerband characteristics.
I imagine an 02a/02j tdi tranny would get you alot closer to the 13's as well.
-
#12
by
3play
on 14 Oct, 2006 00:01
-
Hilfolk, why don't you just install an 02a/02j, and be done with it.
Since you guys seem to cross reference trannys, which tranny can I put in an 81 diesel rabbit? Are there any newer models that are suitable with a high 5th gear?
MM
-
#13
by
macsdub
on 15 Oct, 2006 08:37
-
Hilfolk, why don't you just install an 02a/02j, and be done with it. 020 trannys are horrible at holding any high torque applications, and none of them have gearing which compliments the TDI powerband characteristics.
I imagine an 02a/02j tdi tranny would get you alot closer to the 13's as well.
cause i can use my 6 pound flywheel,and the clutch assy is way lighter,thats why i dont wanna convert to a later box just yet
that tdi flywheel weighs as much as a normal (210mm)clutch assy i bet
im lookin at putting a 3.67 r+p in a 7A box
that will help out gearing quite a bit
oh yea ,,cant forget the diff rivet bolt kit too
i like the way it spins up now,,like no flywheel mass,its great fun!!!
-
#14
by
burn_your_money
on 15 Oct, 2006 12:48
-
Since you guys seem to cross reference trannys, which tranny can I put in an 81 diesel rabbit? Are there any newer models that are suitable with a high 5th gear?
MM
Check out
www.scirocco.org/gearsAny from a mk1/mk2 will bolt right in. The 4S is a nice one