Anyone know what size the banjo fittings are on the KKK's, I want to make up some lines for boost controller/ gauge
no idea.
But when I was at the bone yard I noticed that the gasser VW's used some nice braided stainless steel lines that looked like the same banjo...
i wanna say 10mm,but the thread picth,,i dunno
My spare K24 has 8mm x 1.00 pitch.
Banjo on the compressor housing, straight through pipe type fitting on wastegate. Same thread both ends, wastegate end looks like maybe it should have a washer under for seal, but my spare does not.
CIS fuel banjos (like to the cold start fuel injector) fit perfectly.
doyou have the stock pipe on the turbo for the wastegate? you just cut it like mine
