In need of help! Yesterday morning I started my car- but it seemed to be stuttering a little (the rpm's were jumping a little- usually happens if the advance is not out all the way). I pushed in the advance (in hopes of pulling it back out again) and the rpm's dropped really low and the car stalled. When I tried to start the car again...it just wouldn't fire back up. It was turning over, but just wouldn't fire. Now it's having trouble even turning over (with a boost from my friend as the battery ran out of juice). When I try to start it, I notice that the timing belt will not move. The belt seems to still be on ok...and I don't suspect that the crank gear has been sheared. Any help is much appreciated. I hate taking the TTC!
guess i should have stated i have a 1995 1.9L
The crank pulley key has sheared, very common problem with the 1.9TD. Do a search on "AAZ crank pulley" or "1.9TD crank pulley". You'll find lots of info.
Good chance you might have some bent valves too.
Good chance you might have some bent valves too.
I would put the probability of bent valves at a solid 100% if the cam isn't turning at all...
Where should I look for replacement parts? And what will I need to replace? Just bought the car 2 months back...and although I was aware of this common problem, thought I'd have a bit more time than this. Thanks for your thoughts! Always appreciated
Without a location in your profile I can't really suggest where to shop for parts, you could be anywhere...
You'll need a crankshaft (or get yours repaired) a crankshaft timing pulley, some valves/lifters, gaskets crank seals, head bolts, rod and main bolts and lower end bearings.
Sorry, I'm in Toronto during the week and St. Catharines on the weekend.