Having just done the max fuel screw thing and liking it i`d like moore boost please but i dont know what turbo i have my engine is a 1993 seat 1.9td aaz, there is no threaded bit to the wastegate so that discounts that and the link in the more power for your 1.9 is dead.
cheers Ray :lol:
Install a bleed valve.
I THINK you got a K14 ore a T2.
correct me if i'm wrong pls
Greetz, Benjamin
I did a ball and spring controler.
Now I hit 11 PSI aby 2400 RPM instead of 3200.
from 2800 up, I am 14.7, where I used to max at 11.
My 'saffety falve' still works, I just threaded the screw in so It doesn't open till 15. I am not gonna turn it up any more untill Ihave my IC installed.
the car is even more enjoyable to drive without the 'hole' after each upshift.
I had to seriously port the valve to get it to work with the 2 hose WG actuator I have. Initialy it would take off like a rocket, then pop the safety valve around 4000 RPM, even with the valve set to open at 7 PSI.
Benjamin
i`m in the uk just north of london, i could e-bay it ......but is that not less fun??
cheers Ray