-
FS 1.9 AAZ td stuff 3 motors...
by
houseofdiesel
on 15 May, 2006 08:55
-
Okay, I have collected too much stuff now...
Complete 1.9 td (AAZ) motor, turbo/exhaust manifold/oil lines injectors/pump/lines, waterpump, intake manifold, valve cover/oil pan, injection pump was recently rebuild (no idea what/where/why) it is clean/media blasted/painted with paint marking on all bolts. Mileage unknown will try to get it running this week in the garage and test out compression/oil pressure
Complete 1.9 td (AAZ) motor, removed from 95 Passat 250000kms, turbo is shot (lots of play) but otherwise excellent-comes with everything-injectors, pump, brackets/serp belt system, manifolds, lines/hoses etc, ran when removed very good motor
Parts motor-1.9 td AAZ long block only dropped combustion chamber insert, major damage on one cylinder, good parts like pistons, rods, crank, cam etc.
Let me know what your looking for/interested in, I am going through southern Ontario this week (from Ottawa) Kitchener/Toronto etc and could drop off. I need to fund my 98 Jetta TDI project, consider trades for TDI stuff like a performance turbo, short block etc.
Greg
-
#1
by
Fisher
on 15 May, 2006 09:07
-
I'm interested in your engines. Please forward pricing information. I'm in Seattle, WA. Are you willing to ship?
Rudy
-
#2
by
Cynical 1
on 15 May, 2006 09:24
-
I need the following:
Brackets that hold the pump, alternator adn compressor to the block.
Intake manifold.
Exhaust manifold and turbo.
Waterneck on left of engine ( above tranny ).
Thermostat housing.
Metal water pipe fron thermostat housing area to side/rear of block.
Let me know if you'll ship to the US.
-
#3
by
houseofdiesel
on 15 May, 2006 09:45
-
I am more then willing to ship USA however it is expensive, I would prefer you tell me what agent to use-Canada Post (USPS), UPS, Fedex, Purolator, bus, train, airport etc are all near where I work.
I don't want to part out the complete motors just yet, let us wait a week to see how much interest there is in them. I am open to offers, I have a crate made of wood that would hold them (enclosed) if needed for shipping.
Greg
-
#4
by
Cynical 1
on 15 May, 2006 10:10
-
OK. Let me know what you decide to do.
-
#5
by
Patrick
on 15 May, 2006 15:29
-
Interested in a complete 1.9, could maybe live with the one with the bad turbo. I've got a couple of 1.6 engines in pieces with good (I think!) garrett turbos. One had an insert come loose in a head and made a mess of one cylinder and piston. Too bad because the engine's already been bored. The other was running but tired, rebuildable with an overbore. Both heads are tough. Interested in trades? What kind of money are you looking for?
Patrick
-
#6
by
houseofdiesel
on 16 May, 2006 06:38
-
No trades unless it is TDI, I have a good 1.6 that I cannot seem to sell as it is and my fleet is slowly getting newer!
I am looking in the $1000 CDN range for complete motors, I have yet to test the engine with rebuilt pump, it was running when removed but I did not see and cannot say how well yet-the motor is surprisingly clean, no big oil leak/sweating etc. I will inspect all crankshaft keyways, oil pressure and compression before shipping anything. Parts motor is $200.
Greg
-
#7
by
A Guy
on 16 May, 2006 11:47
-
Greg,
Tell me about the 1.6 you have for sale. I am in the market for this engine and I too am in ottawa. I'd even entertain an entire running golf or jetta (mk2). Please get back to me. PM me and we can speak via phone or what ever works for you. I'm in my shop until 6pm tonight.
Out.
Greg
-
#8
by
houseofdiesel
on 16 May, 2006 13:59
-
I sent you my numbers in a pm, I have a 1.6 ME diesel and a 92 Jetta diesel complete for sale, lots of parts in the garage-blocks, heads, turbos, etc.
Greg
-
#9
by
glendmcc
on 16 May, 2006 20:39
-
Hello,
I'm interested in finding 5 1.9l rods, pins and pistons for a 2.4l swap over to turbo. Also interested in any complete 1.6 NA or T motors and maybe a 1.9 if I can afford it. the main priority here is the 5 1.9 pistons though. Thanks.
-
#10
by
houseofdiesel
on 26 May, 2006 08:39
-
I hope to test them out this weekend. I have a bunch of parts available too, and some TDI stuff soon.
Greg
-
#11
by
Darkness_is_spreading
on 26 May, 2006 09:47
-
I have been searching for this down pipe and would like to know if you have it and would be willing to part with it. If you have two I would buy two off of you.
-
#12
by
dirtytom
on 28 May, 2006 06:31
-
how much for an aaz injection pump
-
#13
by
houseofdiesel
on 29 May, 2006 13:15
-
I have new downpipes only available, $195 CDN for the kidney shaped one and $225 for the round ones, they have a flange at the bottom for the cat converter.
I would sell the rebuilt injection pump for $400, it cost over $1000 for the repair.
Greg
-
#14
by
Bad Karma CZJ
on 31 May, 2006 16:05
-
sent you a PM..
