Toe-in - General - VWDiesel.net The IDI, TDI, and mTDI source.

• Toe-in by 92EcoDiesel Jetta on 17 Nov, 2014 07:38
• Anyone know what the toe-in specs in inches are (not degree/minutes) for 92 Jetta and 81 Caddy? Most non VW cars I've owned in the past are 1/16". The Caddy manual I have says to set the toe-in as close to zero as possible...the closer to zero, the more squirelly the front end will feel. What do you set yours to?
  
  Yes, I am doing it myself. Have been for many years with a pretty accurate method I've been using.
• #1 by 745 turbogreasel on 17 Nov, 2014 13:03
• Quote from: 92EcoDiesel Jetta on 17 Nov, 2014 07:38

  (not degree/minutes)
  

  Why on earth would you use anything else?
  
  Measuring from the tire? rim? what size rim?
  
  I usually shoot for a convergence a little under an inch in 20 feet unless I need better turn in.
• #2 by 92EcoDiesel Jetta on 22 Dec, 2014 14:27
• Quote from: 745 turbogreasel on 17 Nov, 2014 13:03

  Quote from: 92EcoDiesel Jetta on 17 Nov, 2014 07:38

  (not degree/minutes)
  

  Why on earth would you use anything else?
  [image]http://mathworld.wolfram.com/images/eps-gif/IsoscelesTriangle_800.gif[/img]
  Measuring from the tire? rim? what size rim?
  
  I usually shoot for a convergence a little under an inch in 20 feet unless I need better turn in.
  

  
  Because a ruler cannot measure angles. What is that link you posted? Could not get it to work.
• #3 by burn_your_money on 23 Dec, 2014 13:19
• I fixed the link.