ASF, AON, ACN, ACL (8v) bolt to my 1.6l diesel? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• ASF, AON, ACN, ACL (8v) bolt to my 1.6l diesel? by sethyboy85 on 26 Mar, 2006 19:28
• just that simple would a ASF, AON, ACN, ACL (8v) tranny bolt to my diesel?
• #1 by X@V on 26 Mar, 2006 20:03
• They will bolt.
  
  The ratios are different.
  
  http://cars.vwsport.com/gears/index.html
• #2 by Maarten on 27 Mar, 2006 04:48
• bolt yes... but clutch/pressureplate/flywheel are needed too, the shaft is thicker and has more splines on it.
  
  And the drivesaxles have 100mm CV joints instead of the 90mm, so you need those too.
• #3 by sethyboy85 on 27 Mar, 2006 05:23
• Quote from: "X@V"

  They will bolt.
  
  The ratios are different.
  
  http://cars.vwsport.com/gears/index.html

  
  
  yes I know I want a longer geared tranny. clutch/flywheel are no big deal
  
  both sites that I have seen are conflicting saying that a ACN and ASF are 90mm and 100mm (different years I guess)
  
  does a 100mm use the same outer knuckle or would I need those as well off of a car.
• #4 by wyldman on 27 Mar, 2006 19:19
• All you have to worry about is the flange size,the outer ends are the same.
  
  It's not hard to swap flanges if you need to.
• #5 by dubCanuck1 on 27 Mar, 2006 20:55
• I've got two ACN's. One's a 100mm and the other's a 90mm. Go figure.